Redline Wheel Bolts Lock Set Review Video

Oh it won't stand up well to an angle grinder at all. The Trimax Heavy Duty Adjustable Wheel Lock item #TMX42ZR is designed to stop the casual thief with bolt cutters. Not a dedicated criminal with power tools. I am sorry but I do not have…

The very end of center cap included with the Aluminum Viking Series Valhalla Trailer Wheel - 13" x 5" - 5 on 4-1/2 - Silver Spoke #AX02350545BMFL you were looking at is removeable without taking the wheel off so you will have no issues…

I recommend the LubriMatic LMX Industrial Strength Grease #L11390 for your Dexter axle on your 2021 Vista Cruiser Travel Trailer. This grease is specifically formulated to work in extreme hot and cold temperatures under high pressures. It is also…

The width of the key for the Wheel Lock Set #RG01-150 is right at 1" which you can see in the attached photo.

If the Kenda Karrier S-Trail ST145/R12 Radial Tire #AM10140 and the 12" Aluminum Wheel #LH45FR with 5 on 4-1/2" bolt pattern matches up with what you have now, then it will be a direct fit replacement. If it does not, then you will need to…

You can attach D-Ring Tie Downs most anywhere on a trailer. You need to select the location based upon what you need to tie-down. When possible, it would be best to drill through metal to install the rings. You can mount them to the wood planks, but…

I would recommend you get a Fulton Hi-Mount Spare Tire Carrier with lock #FETCSTL0701. With this set up you will get the carrier and lock in one.

Your 285 series tire is approximately 11.22" wide, so a wheel lock for up to 12" wide tires, like the Club Tire Claw XL Wheel Lock with Lug Nut Protector Plate, part #WI491KA-491LNP that you were looking at should work for you, since the…

We do have the lug nut protector plate available for the Tire Claw XL Wheel Lock. You will need part #491LNP. You will need to drill into the inside of the outer arm on the Tire Claw. The plate comes with mounting hardware. The back has a foam…

The Club Tire Claw XL Wheel Lock with Lug Nut Protector Plate, part #WI491KA-491LNP, that you referenced was designed to used on tires that are up to 12 inches wide. This Tire Claw attaches to the tire so the electric brakes of your trailer should…

For the tire size ST225/75-15 in the Load Range D like the part #274-000029 the weight capacity is 2,540 lbs at 65 psi. Which with just four of these you'd be over the 10k GVWR of the trailer you mentioned so you should be fine.

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…