Bunk Kit CE27600K90 - What Are The Dimensions Of The 90 Degree Uprights?

Question

Question:

Bunk kit 27600k90 what are the lengths of the 90 degree uprights Vertical height and horizontal adjustment , lengths?

asked by: Albert A

0

Expert Reply:

I was able to track down some measurements for the 90 degree uprights that are included with the # CE27600K90 bunk kit. Hope this helps. See below:

A: Internal Distance - 15-1/2"
A: External Distance - 17"

B: Internal Distance - 18"
B: External Distance - 19-1/2"

expert reply by: Jesse M

0

CE27600K90 90 Degree Upright Dimension
(click to enlarge)

Answer 1

You could flip the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27620 mounting bracket upside down and just shoot some self-tapping screws through the diamond plate step, but this wouldn't provide as much strength for the posts in the…

view full answer...

Answer 2

Since the outside frame channel on your trailer is about as wide as your boat you'd need to go with a guide on that has a 90 degree angle for the upright posts instead like the part #CE27600K90 so that you'll get closer contact like…

view full answer...

Answer 3

The CE Smith Bunk Board Guide-On Kit, part #CE27600K75 includes everything necessary to install bunks up to 12 feet long, including the 70° posts, carpet, brackets and mounting hardware. The mounting hardware is compatible with frame members…

view full answer...

Answer 4

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

Answer 5

For bunk style guide-ons such as #CE27600 the bunk board and boat should only barely touch if at all. There isn't a hard and fast rule that says it should be this many inches. But since guide-ons are not meant to support weight like a…

view full answer...

Answer 6

I have a solution for you, but unfortunately those 7ft long bunk boards #CE27845 are going to be the longest ones we currently offer. If you wanted to source the wood yourself you could then just use some marine grade carpeting like the CE Smith…

view full answer...

Answer 7

Choosing the correct guides is a little different for each boat/trailer combo but we do have a few options that you can choose from. I recommend going with either the CE Smith Bunk-Style Guide-On Kit #CE27600K90 where you supply your own 2x4 boards…

view full answer...

Answer 8

You certainly could make your own bunk boards using pressure treated lumber and bunk carpet like #CE11372 if you wish. CE Smith doesn't use pressure treated lumber in their bunk boards because some of the chemicals used to pressure treat…

view full answer...

Answer 9

So the U-Bolt will secure the CE Smith Light Duty, Vertical Bunk Bracket #CE10603G with the ends pointing towards the back of the trailer. If you look at the picture you took it looks like those fasteners holding your current brackets could be…

view full answer...

Answer 10

The CE Smith Post-Style Guide-Ons for Boat Trailers part #CE27648 are universal fit boat guide-on designed for I-beam trailer frames up to 4" wide. The closer to the rear they are installed, the more they will assist with loading. That said,…

view full answer...

Answer 11

I've had to do this before, so I understand your concern about the carpet getting shredded. What I did was take a sharp utility knife and cut a small X right where I wanted to drill my holes. This worked very well and didn't rip up the…

view full answer...

Answer 12

It sounds like you're describing something like the CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27660. Guide-ons are pretty universal fits so as long as your frame matches the 3" wide x 4-1/4" tall specs for the U-Bolt kit and…

view full answer...

Bunk Kit CE27600K90 - What Are The Dimensions Of The 90 Degree Uprights?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching