Fulton Fold-Away Coupler Hinge Kit Review and Installation Video

Oddly enough I can't find a decent u-bolt that we carry that would work well for your application.

I have a solution for you but the part #CE10190GA-4 is not available in a half kit so what you would want is the part #CE10190GA with the swivel bracket part #CE10206G. We don't have the bolt and nut though so you would need to supply that…

Based on the picture you submitted it looks like your trailer was originally intended for a different boat and you'd need to made some modifications to it to get all of the bunks to fit the hull proplerly. The CE Smith Double U-Bolt Bolster and…

The Fulton Fold-Away Hinge Kit, item #FHDPB230101, is designed for bolt-on installation. If you need a weld on kit, you would use the Fulton Fold-Away Coupler Hinge Kit, Weld On, item #FHDPW230300, for your application. To install either of these…

The diameter of the U-bolts that need to be used with the CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies #CE10190GA-4 is 1/2 an inch. If you do not have enough U-bolts, you can purchase 8 of them with the washers and nuts included with…

I would be happy to. Since your 2019 Heartland RV Landmark has 8,000 lbs axles you will need the Kodiak Disc Brake Kit item #K2HR89DD. These will replace the hubs and drums you have with rotors and hubs. The mounting brackets will attach to the…

Yes, the Roadmaster Comfort Ride system part #RM-2460-2570 would fit your 2019 Fuel 335 Toy Hauler. It would do a great job improving the ride quality.

The overall length of the Fulton hinge kit part #FHDPW330300 is 7-1/2 inches. You should note that since this slips over the frame channels it does not add this length to the tongue of the trailer.

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

The Dexter Zinc-Plated Brake Actuator #T47457007K does not have an access hole to insert a screwdriver to bleed the master cylinder. You will have to use the old method with a 2x4 and the safety chains. While the trailer is disconnected from the…

Yes you certainly can go from a 4 leaf to a 6 leaf spring on your 2020 Open Range 5th Wheel. It will add slightly to your ride height, but there should not be any other components that will be compromised or need to be swapped out. You will want to…

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…