Fulton Folding Tongue - Coupler Hinge Kit - FHDPB230101 Review Video

The reason the wall thickness is listed for the Fulton Fold-Away Coupler Hinge Kit, part #FHDPB230101, is because the Torx bolts included in the kit are a certain length and the nuts may not catch the threads when installing the hitch due to the 1/4…

I recommend using the Fulton Fold-Away Coupler Hinge kit part #FHDPB230101 that fits a 2"x3" trailer tongue. It comes with all the hardware needed to install. Please keep in mind the trailer tongue material thickness must be…

The Fulton Fold-Away Coupler Hinge Kit #FHDPB230101 has a 5,000 lb trailer capacity. I attached a chart that breaks down it's capacity based on how you install it.

All of the needed install hardware for the Fulton Hinge Kit part #FHDPB230101 that you referenced comes with the kit. You would not need to provide your own.

The Classic Accessories Tire Cover part #052963762204 that you referenced is designed to fit tires that are between 19 and 22 inches in diameter so it would work well on yours that are 20-1/2 inches in diameter. I attached a review video for you to…

For the Malone LowMax trailer the correct replacement dust cap is the part #F001518.

The only way I can recommend a tongue extender for your trailer that has a 3 inch by 3 inch channel is to remove your current coupler, install the hinge kit part #FHDPW330300 in place of it and then install your coupler onto a length of 3 by 3…

When choosing tie-down straps like the BoatBuckle G2 Retractable Tie-Down Strap, #IMF14220, you will want to keep a few things in mind. Boat tie-downs are designed for normal highway driving. The purpose of most boat tie-downs is to strap the…

I went out into our warehouse and grabbed a BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Strap #IMF17663 to measure it and found that it measures 13 inches from the end of one hook to the other when the strap is adjusted as tight as it can go. I…

I went out to the warehouse and pulled a BoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down Strap #IMF17634 to measure it for you. Both the fixed end and the ratcheting end of the straps are about 5 feet long (just the strap part. From the end of the…

For your aluminum trailer with a galvanized steel tongue (swing-away tongues cannot be used on aluminum tongues), you'll need a die-cast steel tongue with a zinc finish from Fulton. The correct fit is going to depend on the size of your trailer…

It is strange any time a turn signal works but the brake light on the same side doesn't. this is because the brake and turn signal lights are on the same wire/bulb. The usual culprit is a bad ground. Ground problems normally show up when there is…