etrailer Trailer Hub And Drum Assembly Installation Video

Yes, for Dexter part number K08-247-1G you'll need the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased #84546UC3-EZ.

We do have both the Inner Member #DX97FR and Master Cylinder #TK71-756-00 for your Dexter A-60 drum brake actuator. These both have the aluminum construction you are looking for.

For a 3,500 lb hub/drum replacement that will work well to replace your AL-KO 8500 you'd want the hub part #84546UC3-EZ which fits the spindle and has the 5 on 4-1/2 inch bolt pattern you need. For brake assemblies then the Electric Brake…

The closest option we have that would work is the part #010-180-00 which has an inner diameter of 1.68 inches and an outer diameter of 2.33 inches.

For a UFP model A-75 drum actuator we have the replacement inner member part #DX97FR that is a fit for the Legacy UFP actuators which includes what you have.

The Replacement Inner Member for Dexter DX7.5L Brake Actuator part #DX97FR is compatible with a UFP A-70 Surge Brake Actuator.

You will need either the Replacement Inner Member #DX97FR for tandem axle drum brakes or the #DX99FR for a tandem axle with disc brakes. The capacity was increased on the A-60 from 6,000lbs to 7,500lbs which is why you see the higher rating on the…

I went ahead and called my contact at Redline Trailer Repair Parts, and they confirmed that nuts in the Mounting Hardware for 10" Brake Assemblies #BRKH10B have a diameter of 7/16mm and have 20 threads per inch. Unfortunately, there are no bolts…

There isn't a rebuild kit, but you can definitely replace your TDE LP7000 brake actuator with one of the following, depending on if you have disc or drum brakes: - Drum Brakes: Dexter DX7.5L A-60 Brake Actuator #DX33FR - Disc Brakes: Dexter…

You can definitely add brakes to an axle without purchasing another one. The easiest thing is if your axle already has a brake mounting flange installed on it. If your axle doesn't then you can have one welded on, but we typically recommend…

Bearing Buddy pumps grease into the center of the hub all the way back to the grease seal. A double lip seal should be used to prevent grease from blowing out the seal when added. When the hub and seals and bearings are first assembled, they should…

For your 3500 lb axles, I recommend starting with the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies #AKEBRK-35-SA. These assemblies will self-adjust to ensure you have the best braking without needing to…