etrailer Left and Right Hand Hydraulic Brake Kit Installation Video

Hey mark I can definitely try to point you in the direction of the correct hubs and brakes for your trailer. I was not able to find any useful references for the numbers you provided, but there are other ways to determine the correct hub. Do you…

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

Are you basically asking how much length would this coupler add to the tongue of your trailer?

Hey Al, so we have a solution but since disc brakes require a higher PSI than drum the #DM62VR would not work on drum brakes. Instead you'd want to go with the part #DM72VR which is basically the exact same thing but made for drum brakes. You can…

To bleed the brakes on your Kar Kaddy SS Tow Dolly Item #DM9713045 you can use the Hand Vacuum Pump Brake Bleeder Item #PTW87030 by attaching the vacuum hose to the bleeder on the brake caliper and the other end to the reservoir and then you'll…

The Brophy Camper Scissor Steps part #AS24 will require 1-1/4" of clearance between the bottom of the door and bottom of the cab on your Palomino Truck Bed Camper in order for the mounting bracket to attach. If you removed a portion of the trim…

The best replacement brake kit assembly that you're looking for is one that we have branded under the etrailer name: - Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs #AKFBBRK-35-D This has the…

To determine which hydraulic drum brake assemblies will fit on your 2,500 pound axles you'll need to measure the dimensions of your drums. For example, if your drums are 10 by 2-1/4 inches you can use #AKFBBRK-35-D. Since you have a boat trailer…

The Replacement Inner Member for Dexter DX7.5L Brake Actuator part #DX97FR is compatible with a UFP A-70 Surge Brake Actuator.

We off the Demco tow dolly Replacement Hub part #DM04369. This has the 5-on-4-1/2 stud pattern (the same as 5-on-115mm).

In regards to wheel size compatibility, this comes from the hub as the surface area on said hub is what dictates the wheel size. Therefore, if you're already using 13" wheels with your existing hubs then there won't be any issues with…

Brake lines don't have to be difficult to run. I recommend the Kodiak Hydraulic Brake Line Kit - Single Axle - 18' #18SI-BLKIT. This will give you one 18 foot flexible line and one 7 foot line and one 1-1/2 foot long line along with the tee…