etrailer.com Hitch Mounted Cargo Carrier License Plate Mounting Brackets Review Video

With J-pin style hitch stabilizers like the discontinued part #63201 they are designed to go through the hitch and shank with the larger hole and then the j portion comes around and locks into the smaller hole. It almost sounds like you are trying…

I have a solution for you to hook up the Optronics LED Trailer License Plate Light w/ Bracket #LPL55CB to your 2021 Subaru Ascent without tapping into the wiring. You could install Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector -…

In order to choose a cargo carrier that'll work for you, you'll need to measure the distance from your hitch pin hole rearward to clear the spare tire. The cargo carrier you choose will need to have a hitch pin hole to closest portion of the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The weight is just 19 lbs for the Demco spare tire carrier for trailer tongues; it also comes in your choice of silver or black in color (the weight is the same for each): - Silver: Demco Spare Tire Carrier for up to 4" Trailer Tongue…

Yes, the Demco Spare Tire Carrier part #DM15851-76 does work great with the tire size ST235/80R16 that you referenced. We had a customer with your exact tire size send us a picture of it carrying the wheel which I attached.

The overall height of the Demco Spare Tire Carrier #DM15851-76 that you referenced is 18 inches. The mount is 7 inches wide and 6-1/2 inches deep.

The Demco #DM15851-76 has 1/2" x 1-1/4" grade 5 bolt with fine threads (.50NF) so you'll want to use 1/2" nuts with a fine thread to secure your tires. There's also a silver version of the carrier using #DM15851-52

I have found a couple California Laws regarding lights on trailers/accessories. 24600: During darkness, every trailer shall be equipped with taillights, stoplamps (24603) license plate light (24601) and turn signal lamps (24950). 24604: Whenever the…

If you check out the end of the review video you will see the test course video I attached to the right that shows the #e98874 being used in our back lot that has speed bumps installed in it you will see that the hinge portion of the carrier is…

I am sorry to hear about the issue you are having while using your bike rack. I do have some options for you to display your license plate with the bike rack attached but Thule does not offer any products for this purpose. The vast majority of law…

The 4 mounting holes for Enclosed Cargo Trailer License Plate Holder #LP35BB are very small so something like an 1/8 inch self-tapping screw should be what you need. If you already have some screws that are larger there is no harm in using the holes…