Flint Hill Goods 30x50 Wheelchair Carrier with Ramp Review Video

That is a keen observation and a good question. I actually had the chance to assist with assembly of one of the Flint Hill Goods 30" x 50" Wheelchair Carriers #FHG99ZR not too long ago. The main bolt for the shank is indeed quite large, so…

The Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 60" Ramp #FHG99ZR weighs about 42 lbs.

The basket/ramp portion of the Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 60" Ramp #FHG99ZR is bolted to the shank so you would be able to reverse it to have the ramp on the driver's side. You'll want to remove the…

The reason for this comes down to safety and the additional pressures that would be exerted on the components when your Blue Ox Ascent #BX4370 tow bar is not level. The additional force that is put on these components ultimately makes it more likely…

The total weight of the Flint Hill Goods 30x50 Wheelchair Carrier w/ 60" Ramp #FHG99ZR is 42.3-lbs. This cargo carrier is also designed to work with 2" x 2" trailer hitch receivers, has a maximum weight capacity of 500-lbs, and…

From the top of the Draw-Tite Max-Frame Trailer Hitch Receiver #75270, when installed on your 2007 Honda Odyssey, to the ground is going to be approximately 12-3/4". Adding on a 350lb wheelchair and 56lb carrier #FHG99ZR is definitely going to…

The carrier in your picture looks like it's welded to the rear bumper so the closest option we would have would be the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you were looking at. This carrier comes with brackets that can fit…

The tray dimensions of the #TLA7752 are 27-3/4" long x 24" wide and the strap adjustment range is 13-3/4" long x 6-3/4" wide x 13-1/4" tall as a minimum and 27-3/4" long x 23-1/2" wide x 23" tall as a maximum.…

I'm not sure which coupler that is, but I can say that a certain amount of rattling is to be expected because of the space needed to allow the ball to turn inside the coupler-especially with an adjustable coupler. With that being said, you can…

The ride on the back of a trailer is very rough due to the extended distance from the axle so a lot of hitch mounted accessories like the Flint Hill Goods 30x50 Wheelchair Carrier part #FHG99ZR are not rated for this. Instead, I recommend using the…

The MORryde Ceiling RV TV Mount, #MR22ZR is a flip down mount that can hold a TV weighing up to 35 lbs. and uses the VESA mounting patterns of 75mm x 75mm, 100mm x 100mm, or 200mm x 200mm. Depending on what mounting pattern your TV has as to which…

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…