Draw-Tite 2 Inch Long Shank Hitch Ball Review Video

We had the chance to install the Rhino Rack roof rack you have #RRVA118B-2, #RRRLKVA, and #DK438 on a very similar 2016 Honda Fit and we found that the feet fit to the inside of the channel you mentioned. Check out the picture I attached to see…

We have not had a chance to do a specific video of the 2008 model coupe. We are at the mercy of our customers who come in for installs to determine what year, makes, and models we are able to shoot videos for. I was able to attach the installation…

The Bulldog Winch Ratcheting Wheel Tie-Down Strap #BDW20362 is designed to connect to a D-Ring type of connection point so you wouldn't need to install an e-track on your trailer. For your application I recommend installing the Brophy D-Ring…

I was able to find your order and your Curt Class I Trailer Hitch Receiver #C11430 is rated for the torque on your hitch in all driving conditions including inclines. Please make sure you are using the required Curt Trailer Hitch Support Strap #18050…

With cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I…

I spoke with my contact at Curt and he said the Curt trailer hitch #C11389, which you reference, is a confirmed fit for your 2014 Lexus IS 250. The hitch will not interfere with the factory exhaust, however the exhaust must be temporarily lowered for…

You are correct, the 5.30x12 is the SAE nomenclature, while the 145/80-12 is the closest metric equivalent. The two are approximately the same size with the 5.3x12 being about a tenth of an inch narrower and a quarter of an inch taller than the…

Yes, if you install the Stromberg Carlson trailer hitch #SC45MR by welding it you'd have a 3,500 lb towing capacity which be more than enough to tow a 3,000 lb trailer.

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this one…

The 2015 Ford Fiesta ST is the hatchback model, and we have a trailer hitch is confirmed to fit. You would need the Curt Trailer Hitch Receiver #C11067. The accompanying photo is of a hitch on a Fiesta; I have also added a link to an install video so…

From past customers we have found that the TeeNee trailers use a three inch keel roller like the part #YR300Y. That being said I would need to see a picture of your setup to give you the best options we have. I did some research on your Tee Nee…

The Draw-Tite trailer hitch, #36297, that you have referenced is a Class II trailer hitch. with a Class II trailer hitch, you will need to use the manufacturer recommended ball mount. According to the installation details linked below, the required…