Length of Spring Bars on the Curt TruTrack 2p Weight Distribution System # C69JR

Question

Question:

What is the length of the spring bars?

asked by: Alan

0

Expert Reply:

I went ahead and confirmed with my contact at Curt that the spring bars on the Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank # C69JR are 35" from end to end. I went ahead and attached a diagram of this measurement for your convenience.

expert reply by: Bob C

0

Curt TruTrack 2P Weight Distribution System w/ Sway Control # C69JR Spring Bar Length
(click to enlarge)

Answer 1

Thanks for the picture! The Curt TruTrack 2P Weight Distribution System w/ Sway Control item #C69JR will work with your 7,000 lbs Jayco 267BH. The Curt TruTrack has an 800 lbs to 1,000 lbs tongue weight range. The built in sway control will help to…

view full answer...

Answer 2

I would be happy to! Weight distribution systems are selected based off of tongue weight which is typically between 10% - 15% of your trailer's total weight. This would put yours between 250 lbs - 375 lbs. There's really only a couple of…

view full answer...

Answer 3

Hi Emily, Before buying anything you'll want to verify that both the Pilot and the trailer hitch installed on it are rated for use with a weight distribution hitch (WDH). From what I can see Honda does not recommend it because it can shift the…

view full answer...

Answer 4

I reached out to Curt who informed me you will have to get a whole new weight distribution to upgrade to the Curt TruTrack 2P #C69JR. They said the Spring Bar #C86BR will not fit into your Head 17107. So you would only be able to reuse your hitch…

view full answer...

Answer 5

Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…

view full answer...

Answer 6

When it comes to installing a weight distribution system on your 2021 Forest River Cherokee Alpha Wolf Travel Trailer being as close to the trailer weight is the best. I recommend The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round -…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Equal-i-zer weight distribution system #EQ37040ET, which is the same as the product you referenced does not require a 2-5/16" hitch ball; I took a look at the Equal-i-zer site and could not find a reference to that. However, if you need a…

view full answer...

Answer 9

Based on the weight of the 2022 Grand Design Imagine XLS 23BHE I was able to find online the Curt TruTrack weight distribution system part #C69JR would be a great option. With that said it seems to weigh more than what your truck is rated for so…

view full answer...

Answer 10

The spring bars that come with the Curt MV Weight Distribution System part #C17052 are 31-1/2" long.

view full answer...

Answer 11

You'll still be able to disconnect the Curt TruTrack 2P #C69JR from your trailer even though you're not perfectly in a straight line at a 45 degree angle, but you may need to use the trailer jack to take extra tension off the bars to get them…

view full answer...

Answer 12

Only the RB2 head, #58333, is the same between certain Reese systems and Pro Series systems so head #PS58442 will not work with the Reese round spring bars. If you can tell me the part number of the Reese system you have I can look up which head fits…

view full answer...

Length of Spring Bars on the Curt TruTrack 2p Weight Distribution System # C69JR

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching