CE Smith Trailer License Plate Bracket Review Video

The etrailer brand axle #e32GR is pre-greased using a lithium complex multi-purpose grease like the #DX64TR.

I have an option for you, but we do not have any bunk brackets that match what you currently have installed. Instead I recommend the CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4 #CE10000G-4 which will attach to…

All of the swivel brackets we carry use a 1/2 inch fastener (sold separately) to attach the bracket to the mounting surface. The holes to attach to the bunk board are 3/8 inch. You should use the appropriate sized wood screw or bolt to attach the…

It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part #e32GR. The axle being 72" across measured from hub-face to hub-face. This axle comes with 5 on…

I went out to the warehouse and pulled a Offset Spool Roller Assembly, #CE32150G. Measuring from the bottom of the base to the top of the roller in the center section it is 3-3/8 inches. From the bottom of the base to the taller part at either end is…

For the 1/2 inch lug nut #12CLN-L and the 14 inch aluminum wheels you will torque each lug nut to 75 to 85 foot pounds. No lubricant is required. However, since this is on a boat trailer and the hub studs are likely raw steel a little lube would help…

The Peterson Trailer License Plate Bracket part #B440-09 will be an excellent option to replace the license plate bracket on a Malone trailer. It installs via the studs on the back of the driver taillight so it will be a direct fit.

The 4 mounting holes for Enclosed Cargo Trailer License Plate Holder #LP35BB are very small so something like an 1/8 inch self-tapping screw should be what you need. If you already have some screws that are larger there is no harm in using the holes…

The Stainless License Plate Frame - Stainless Steel #CR21110 is a rustproof design. I recommend installing it on your 2015 Winnebago Sprinter Era motorhome using the Star Pin Locking Fasteners for License Plates and Frames - Stainless Steel…

The License Plate Bracket #CR79050 that you referenced does sound like it will work for your application. This bracket was designed specifically for when a license plate doesn't fit the plate holder like what you are experiencing. I have attached…

The correct hardware to mount the Optronics License Plate Holder #LP35BB mostly depends on the type and thickness of the surface you want to mount it on. This plate holder has 4 pre-drilled holes for mounting and these are hidden by the plate once it…

The screws for mounting the license plate that come with the Enclosed Cargo Trailer License Plate Holder #LP35BB are 1/4" screws with a coarse (20 threads per inch) thread style. Attached is a review video for you to check out.