CargoSmart E-Track and X-Track System Landscape Tool Holder Review Video

We carry a very handy 2 inch ball mount for this exact application. The part is #D210. The ball mount slides and pins into your hitch and the top receiver will accept 2 inch bike racks and hold them above the ball. The Ball Mount has a 500 lb tongue…

I grabbed one of the CargoSmart Folding Workbench Brackets #3481744 and got the following measurement for you. With the upright in the tallest position and the threaded insert pushed all the way in, I got a measurement of 40" from the ground to…

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 #E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide #e96RR. This will save…

It could be that the springs are worn out and need to be replaced with either new springs or a new system such as #CB250D96SHD. Inspecting, working on, and/or installing these systems is not something you would want to do yourself because they can be…

If you're looking for wall storage, then the CargoSmart X-Track Trailer Shelf Bundle - Matte Black - Steel - 667 lbs - 5' Long #3481788-T would be the correct solution and it will give you the ability to hang some hooks; if you can locate the…

We don't offer a purpose-built e-track accessory for holding bicycles, but we do have an good option, assuming that the e-track is spaced the proper distance apart. I'd use a #CS97FR CargoSmart J-Hook. The hook itself is plenty large enough…

Either one is fine to do. With the Fulton Hi-Mount Spare Tire Carrier part #FSTC1000301 you are not going to be adding a great deal of width to your trailer so the difference is minimum. Giving you my opinion since there is no rule I would Choose the…

The best option I have for you is to use the MaxxTow Ball Mount part #MT70066 which will raise the cargo carrier another 6" off the ground. The reason I recommend this option over other adapters is because it will not reduce your tongue weight…

The weight capacity of the Malone Dual Hitch Extender, part #MPG544, is 4000 lbs and 400 lbs for tongue weight. Using this extender reduces the towing weight capacity of the hitch on your vehicle by 50 percent. If the hitch that is installed on your…

If you need 18 feet of E-track I recommend using 2 pieces of 8 feet Horizontal E-track part #E19135 and 1 piece of 2 feet E-Track part #EM59150. 8 feet is the longest Horizontal E-Track available. The E-track pieces are not designed to be mounted…

That is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 #e46RR These will fit perfectly with…