Brophy Camper Tie Downs Review Video

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

The HSSF hold down brackets would use the Tie Down Hardware Package, part #TDHP, which includes hooks, chain and turnbuckles. The tie down hardware would typically attach to existing eye bolts built into the underside of camper. If your camper does…

Yes, the Brophy Stake Pocket Mounted Camper Tie Downs #TDSF are a universal part that'll fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction, so these'll work fine with your truck.

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

Both of the Air Lift Loadlifters, the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle, part #AL57289, and the Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle, part #AL57589, will fit your 2022 Ram 2500. One of the differences…

The Brophy Clamp On Camper Tie-Downs #HSSF will have a very slight amount of play since there is a compressible pad to prevent scratches on the bedrails, but it sounds like you're having much more significant play. I've attached a picture…

Yes, the Brophy Clamp On Camper Tie-Downs Item #HSWB and the Brophy Basic Turnbuckles Item #TDHP are not only safe for use on your 2020 Ford F-250, they are a confirmed fit.

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

If you check out the install picture I attached for the #AS23 you can see where it normally installs at the rear of a camper that is installed on a truck. Without seeing your setup it's hard to be more specific but there should be a spot on the…

That is correct, you can tap into the plug and it will provide a charge but keep in mind that this is not the most efficient way for charging a battery. This method does not provide any charge balancing or battery charge management and on newer…

The Aluminum Scissor Steps #AS03 that you referenced weigh 15 lbs and the Scissor Steps #SS03 weigh 29 lbs. As you can see, aluminum is much lighter.

The Brophy Camper Scissor Steps part #SS03 weigh 27 lbs total.