Weight of Brophy Aluminum and Steel Scissor Steps

Question

Question:

What is the weight on both of these?

asked by: Dean

0

Expert Reply:

The Aluminum Scissor Steps # AS03 that you referenced weigh 15 lbs and the Scissor Steps # SS03 weigh 29 lbs.

As you can see, aluminum is much lighter.

expert reply by: Jameson C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

Answer 5

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Answer 6

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 7

If you're having trouble getting access into the bumper when installing the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 you'll simply need to drill an access hole large enough to fit the bolts through and then you can use a…

view full answer...

Answer 8

The bracket of the Aluminum Scissor Steps #AS04 that you referenced stays attached to the camper, but the steps themselves get removed while traveling. Check out the review video I attached for these steps as well.

view full answer...

Answer 9

The mounting bracket of the #AS04 is 25 inches wide. The step width is 18 inches.

view full answer...

Answer 10

We have a couple of 4-step scissor stairs you could use. We have a steel model, #SS04, and an aluminum model, #AS04, and both are 18 inches wide. These stairs mount using an included bracket that looks like #AS2002. So they do not pin into place.…

view full answer...

Weight of Brophy Aluminum and Steel Scissor Steps

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching