Brophy Camper Tie-Downs - Front and Rear Tie-Downs - TDSF Review Video

The Brophy Clamp On Camper Tie-Downs #HSSF will have a very slight amount of play since there is a compressible pad to prevent scratches on the bedrails, but it sounds like you're having much more significant play. I've attached a picture…

The HSSF hold down brackets would use the Tie Down Hardware Package, part #TDHP, which includes hooks, chain and turnbuckles. The tie down hardware would typically attach to existing eye bolts built into the underside of camper. If your camper does…

There are steps that can work for your Northwind camper and I recommend checking out the Brophy Camper Scissor Steps #SS03 which is a triple step that will work with your 24" height. These are not permanently mounted; instead you install a…

The Brophy Camper Scissor Steps part #SS03 weigh 27 lbs total.

If you check out the install picture I attached for the #AS23 you can see where it normally installs at the rear of a camper that is installed on a truck. Without seeing your setup it's hard to be more specific but there should be a spot on the…

Tongue weight is typically 10 to 15 percent of the gross trailer weight. To find the tongue weight, there are a couple of methods you can use. The first requires the use of a bathroom scale. First, make sure the boat trailer is on a level surface.…

For your 2005 Dodge Ram 1500 and the Brophy camper tie downs #TDSF you will need hardware that is the right grade and for the right material (in this case steel) just longer than the included hardware. I recommend using grade 8 hardware. A hardware…

The Brophy tie downs part #TDSF that you referenced are rated for use with any camper that is properly sized for the truck it will be installed in. The Brophy #TDSF mounts into the truck bed stake pocket, where as the Brophy #HSSF tie downs wrap…

Brophy does not have a fit list for tie-downs #HSAB so you have to go by how they install. The external bed rail width cannot be more than 5-1/2 inches wide. There will need to be at least 2 inches space under the lip of the bed rail. And they are…

A couple of things to check when trying to pair monitor to the camera for the Furrion Vision S #FOS43TASF. First make sure that the monitor is close enough to the camera. Next make sure that the camera is receiving power (indicated by LED light on…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

Brophy Camper Tie-Downs #HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle that actual camper load and the tie downs provide stability to prevent the camper from shifting in the bed.