Review of Brophy Camper Tie-Downs - Front and Rear Tie-Downs - HSWB Video

A factory trailer hitch receiver is just a trailer hitch from the manufacturer. If you're referring to Bud's answer then the wording is a bit confusing, but what he was saying was that you would need a factory receiver and no under bed steps.…

Yes, the Brophy Clamp On Camper Tie-Downs Item #HSWB and the Brophy Basic Turnbuckles Item #TDHP are not only safe for use on your 2020 Ford F-250, they are a confirmed fit.

Brophy Camper Tie-Downs #HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle that actual camper load and the tie downs provide stability to prevent the camper from shifting in the bed.

I spoke with my contact at Brophy and they stated you'll be fine using the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSWB as long as the railing on the back of your 2008 Chevy Silverado isn't over…

Motor and Switch Kit for Stromberg Carlson Landing Gear - 5,500 lbs #LG-217884 only will use one switch. If you were to use two motors, then dual switches would be used. I've attached a diagram to assist. The input wires from the battery can be…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

I went out to the warehouse and pulled a tie down hardware package, #TDHP, to take some measurements. With the hooks on the turnbuckle portion out from the inside of 1 hook to the inside of the other hook is 12 inches. When you attach a chain and an…

The Camper Tie Downs, #TDSF, are a universal item made for full size trucks so they would most likely fit your 1996 Dodge Ram. They will also fit any camper that is a fit for your truck. The Camper Tie Down hardware Package, #TDHP, is the correct…

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

Great question! Yes, the Brophy Clamp On Camper Tie-Downs Item #HSWB and the Brophy Basic Turnbuckles Item #TDHP are compatible with your 2020 Ford F-250.

I checked with Curt and they just recently confirmed the fit of their trailer wiring harness #C56377 for your 2020 Mazda CX-5. This is a custom install kit so the install would be super easy as well!

A couple of things to check when trying to pair monitor to the camera for the Furrion Vision S #FOS43TASF. First make sure that the monitor is close enough to the camera. Next make sure that the camera is receiving power (indicated by LED light on…