Review of HappiJac Camper Tie-Downs - Front and Rear Tie-Downs - LC182861 Video

You are correct the HappiJac Camper Tie-Downs #LC182904-182971 are the correct kit for your 2013 GMC Sierra 3500 with a regular cab and 8' bed. I would highly recommend looking at the Torklift Front #TLC2215 and Rear #TLC3212 as a better option…

The HappiJac Camper Tie-Downs #LC182860 you were looking at unfortunately are not a fit for your 1997 Ford F-350 XLT. Happijac does however offer a fit with the HappiJac Camper Tie-Downs #LC182910-182971. This system mounts in the bed and on the rear…

Yes, for your 2001 Ford F-250 crew cab, long bed, diesel, with removed side steps, and an aftermarket hitch the correct tie downs are the part #TLF2011 and #TLR3500 that you referenced.

We do have a few options for you to add camper tie downs to your 2017 Toyota Tundra, but it depends on some of the specifics for your truck. Since you have the running boards that go to the cab and an OEM hitch I have narrowed down your options to…

To install the Replacement Anchor Bolt for HappiJac Truck #LC182852 for the HappiJac Truck-Mounted Camper Tie-Downs #LC182861 follow the instructions below and use the reference picture attached: 1. You'll start by marking a center point from…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The inner diameter of the #Foot Pad #2500-25 is approximately 1-11/16 inches.

The Replacement Foot for etrailer or Ram Electric Jacks #EJ-3520-FT has an inner diameter of about 1-1/2" and its outer diameter is 1-3/4" which is the measurement you'll need if you are looking for a replacement. This foot is designed…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

Since you only need a front tie down setup for your 2003 Ford Super Duty all you need is the part #LC182910-182971 and you'd be set. Then for a set of turnbuckles you'd only need the part #LC182895 and have that covered as well.

Thank you for providing a photo of your hitch cross tube's open ends. Yes, this is where the TorkLift Camper Tie-Down #TLF3001 will install. The linked installation instructions show the process with clear color photos to detail the install…

I went out to the warehouse to take a look at the Brophy Camp On Camper Tie-Downs #HSAB referenced in your question. From the tie-down where it will clamp onto the inside of the bed rails to the outermost part of the unit, I measured a distance of…