Will the Brophy Stake Pocket Mounted Camper Tie Downs Work W/ A 2022 Toyota Tundra?

Question

Question:

Will this product work with a 2022 Toyota Tundra 6.5 ft bed?

asked by: Rudy

0

Expert Reply:

Yes, the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are a universal part that'll fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction, so these'll work fine with your truck.

expert reply by: Bryce D

0

Answer 1

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers part #AL88289 could potentially affect the ride quality in a negative manner if you were to hit a dip or pot hole in the road while unloaded because of the internal…

view full answer...

Answer 2

I checked with TorkLift, and their tie-downs will not fit your 2021 Toyota Tundra since you have a step underneath your truck bed, but depending on a couple measurements, you will still be able to use the Brophy Clamp On Camper Tie-Downs #HSAB. These…

view full answer...

Answer 3

Our most economical camper tie downs are the Brophy Camper Hold Downs, #HSSF, and the Stake Pocket Tie Downs, #TDSF. These are universal tie downs designed to fit a number of trucks. I spoke with Brophy and they have not tested these tie downs on a…

view full answer...

Answer 4

I checked the installation instructions for the Air Lift Ride Control Air Helper Springs #AL59530 that you referenced and there is drilling into the frame to attach the upper brackets of this kit onto your 2004 Toyota Tundra. I attached a picture…

view full answer...

Answer 5

According to CR Brophy, the TDSF camper tie-down you refer to is not compatible with GM trucks after the 1988 model year. My contact tells me that the HSSF tie downs are indeed compatible with a 2012 Silverado. If you look at the provided photo, you…

view full answer...

Answer 6

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

view full answer...

Answer 7

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 8

The difference is the part #TLD3113 fits the 2020 Ram 2500 and the part #TLD3112 fits the 3500 models. They are not interchangeable. Since you have a 2500 model you would want the TLD3113.

view full answer...

Answer 9

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 10

The Brophy Clamp On Camper Tie-Downs #HSSF will have a very slight amount of play since there is a compressible pad to prevent scratches on the bedrails, but it sounds like you're having much more significant play. I've attached a picture…

view full answer...

Answer 11

I checked with Torklift and the correct tie downs for your 1995 Ford F-350 that has running boards that run under the bed of the truck are part #TLF4000 and #TLR3501.

view full answer...

Will the Brophy Stake Pocket Mounted Camper Tie Downs Work W/ A 2022 Toyota Tundra?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching