Brophy Heavy Duty Cable Camper Jacks Review Video

Thanks for the photos and like you said, they are the Atwood jacks 86065, which are discontinued jacks. What that means is the best option we can offer are new, manual camper jacks, the Brophy Cable Camper Jacks. Based on my research, your 2014 Lance…

The best and most secure camper tie down system that fits your 2016 Toyota Tundra 6.5 foot bed double cab is by far the Happijac system part #LC184089. This kit attaches to the truck frame instead of to the bed which provides a much stronger and more…

Yes, we still carry the TorkLift Tie-Downs for your Double Cab 2015 Toyota Tundra: - Front #TLT2309 - Rear #TLT3306 Attached are some videos for you to check out!

No, it is not recommended to try to straighten a bent jack tube. That would put more stress on the steel and there could also be internal damage that is unseen from the outside. I recommend replacing the damaged leg to avoid all potential issues…

The RoadMaster Falcon 2 Tow Bar - 6,000 lbs, item #RM-520, is designed to be used with, included, Quick disconnects and a quick disconnect cross bar like the Roadmaster Quick Disconnect Tow Bar Base Assembly, item #910021-00, that you mentioned. This…

I contacted Brophy and the Brophy Heavy Duty Cable Camper Jacks part #CX74 are designed to be used on a solid flat surface preferably concrete. Your concerns are valid that the camper may slide off if the ground is unstable. They do not recommend…

The Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2 #CJ74 don't really stick out . They hold the camper pretty much flush with the edge of the camper. I went into our warehouse to measure for you and the 2x2 inch l…

The Brophy Heavy Duty Cable Camper Jacks #CX74 may be able to work for you depending on the configuration of your camper. They do not have the same design in terms of fitting into the corners of your '73 Ford camper; the Brophy #CX74 uses…

We don't currently have any customer submitted photos for the Brophy Heavy Duty Cable Camper Jacks #CX74, but we do for the lower capacity #CJ74, which uses the same lift brackets. From the edge of the tube to the lift bracket is approximately…

The Swing Out Extension Brackets for HappiJac Truck Camper Jacks - Qty 2 #LC182496 will have 3.5 inches up to 4.5 inches depending on your camper brackets. This will be per side. Based on your photos it looks like you'll get about 3.5 inches per…

Yes, the Brophy Cable Camper Jacks #CJ31 can be used with a dual rear wheel truck to help lift your in bed camper.

We have manual truck bed camper jacks like the Brophy kit part #CJ74 which will work great, but we do not have any electric ones at this time. These have a combined weight capacity of 3,000 lbs and a lift range of 17 to 67 inches.