TorkLift Tie-Downs for a Double Cab 2015 Toyota Tundra

Question

Question:

Im looking for torklift tie downs for my truck, 2015 Toyota Tundra double cab factory hitch, side step not extended under bed. I have researched part numbers Front: T2309*, Rear: T3306* do you still stock this product?

asked by: Ken S

0

Expert Reply:

Yes, we still carry the TorkLift Tie-Downs for your Double Cab 2015 Toyota Tundra:

- Front # TLT2309
- Rear # TLT3306

Attached are some videos for you to check out!

expert reply by: Jon G

0

Answer 1

We do not carry the Reico-Titan products so my research was more limited but after doing some research I was able to locate the installation instructions for the Reico-Titan Jacks. They have brackets listed specifically for the "C" clamp…

view full answer...

Answer 2

It looks like you went through our fit guide to find the camper brackets for your 2014 Toyota Tundra. The front and rear camper tie-down brackets are sold together in our fit guide. You should see two part numbers on the part number line. The first…

view full answer...

Answer 3

I have a great suspension enhancement system that you can install on your 2021 Toyota Tundra. The RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS34FR is going to be a great option to improve your vehicle's stability, handling, and…

view full answer...

Answer 4

The TorkLift tie downs #TLT2309 and #TLT3306 installation instructions will be included. I went to our warehouse to look inside the box and instructions are included. See the picture I included on part #TLT2309.

view full answer...

Answer 5

The Derringer set you referenced is only available in a set of 4 that has two longer and two shorter turnbuckles but we do have the Torklift Springload part #TLS9050A which is a set of two that has a range of 35 to 45 inches which is similar to the…

view full answer...

Answer 6

I was not able to see where these tie-downs are compatible with your Tacoma. One of the notes in the specs says it is not compatible with plastic bed rails, but I may have an option that will work for you. I have atatched a link to our product page…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

TorkLift Tie-Downs for a Double Cab 2015 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching