HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs
(3 reviews)
Price: $2,411.82
Need help with installation?
Locate installers near meCustomers prefer these similar products
- All Info
- Reviews (3)
- Q & A (0)
- Photos
HappiJac Camper Jacks
- Truck Camper
- Stabilizer Jacks
- 8001 - 9000 lbs
- 4 Jacks
- 34-1/2 Inch Lift
- HappiJac
- Steel
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.
Features:
- Camper jacks allow you to load and unload your truck bed camper
- Smooth, easy cranking thanks to maintenance-free Acme screws
- Self-lubricating nuts prevent overextension of jacks
- Square tubing provides superior strength and durability
- Concave footpads reduce movement and provide increased stability
- Locking levers keep jacks at desired height
- Lower lever when lifting or lowering jack
- Raise lever to lock jack in place
- Easily accessible components make for simple maintenance
- Hand crank (sold separately) attaches for simple, manual operation
- Debris cover prevents dirt and grime from building up around crank socket
- Power drill with 1/2" hex socket can be used to raise or lower jacks when not bearing weight
- Zinc-plated inner and outer tubes resist rust and corrosion
- Outer tube has powder coat finish for added protection against the elements
- 4 Camper jacks and mounting brackets included
- Mounting brackets are designed to fit most campers on the market
- Made in the USA
Specs:
- Overall weight capacity: 8,800 lbs
- 2,200 lbs Per jack
- Lift: 34-1/2"
- Outer tube height: 51"
- Tube width: 2"
- 1-Year warranty
Note: These camper jacks are designed for lifting and lowering only, and should not be used to support your camper during storage.
Lifting your truck camper on and off your pickup truck is challenging and tedious if you don't have the right equipment. This set of reliable camper jacks helps you load and unload your camper with ease. The jacks bolt on permanently to each corner of your camper and provide support to handle even multi-slide campers, which can weigh more than a traditional in-bed camper.
Camper Jacks are Built to Last
HappiJac camper jacks are built to last with heavy-duty, 2" square tubing for superior strength and durability. The internal steel Acme screw allows for easy cranking with up to 34-1/2" of travel. And the self-lubricating, friction-reducing nut eliminates screw maintenance. The internal components are also easily accessible should the jack ever require service.
Zinc-plated inner and outer tubes resist rust and corrosion. A white powder coating on the outer tube provides additional protection against the elements, plus a nice, clean finish that complements your camper. The concave footpad reduces movement and provides greater stability than large, convex footpads.
Simple Operation
Loading and unloading your camper with these jacks is simple. To begin, make sure you're on level ground. Choose the jack to start with and turn the locking lever so it faces down. This lever is designed to lock the jack in place until you're ready to raise or lower. Be sure that the locking levers of the remaining jacks are facing up to keep those jacks in place while you crank the first. Remove the debris cover from the crank socket and, using a crank handle (sold separately), turn counterclockwise to extend or clockwise to retract the jack. Reset the locking lever to the "up" position when you're done and move onto the next jack. A power drill with a 1/2" hex socket can be used to raise or lower the jacks when they're not bearing weight.
It is recommended that 2 people operate the jacks simultaneously to make it easier to raise each side of the camper evenly. However, 1 person can do the job by alternately cranking each jack in small increments. When lifting and lowering your camper, be sure to keep the front of it higher than the rear, and always keep it level side to side.
Easy Installation
The included brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
For dually pickup trucks, an optional swing-out bracket (LC182496) can be easily installed to give you the additional clearance you'll need for easy loading and unloading.
Upgrade Anytime to Electric Operation
For faster, electric operation, these manual camper jacks can be easily upgraded to a wireless remote-controlled system with the HappiJac manual-to-electric conversion kit (LC733960-182524). Electric operation makes it easy to mount or remove your camper on your own, rather than having to rely on someone else to operate the jacks on one side while you crank on the other to ensure the necessary incremental adjustments. And if you normally do this on your own, then you'll save a ton of time not having to bounce from side to side. Also, using the wireless remote to operate these jacks gives you the freedom to stand back and make sure that you're keeping your camper level every step of the way.
736514-4 Lippert Components (LCI) Happy Jack Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs - Qty 4
Replaces 4100, 4150, 4160, 4200, 4500, 4560, 4600, and 4660 HappiJac Systems
Item # LC736514-4
Installation Details
Customer Reviews
HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs - LC736514-4
Average Customer Rating: 3.7 out of 5 stars (3 Customer Reviews)
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.by: Mark10/17/2023
These camper jacks arrived with a damaged protective weather seal. When I contacted etrailer for a replacement, they told me there were no replacement parts available and nothing they could due about it. The failure appeared to be a result of poor packaging. Very disappointing for an expensive item.
by: Kenneth 11/06/2022
by: Charles 09/09/2022
3
3
See what our Experts say about this HappiJac Camper Jacks
- Will HappiJac 4600 Series Motors Made In 2008 Work With HappiJac Jacks LC736514-4?I reached out to my contact at HappiJac and the motors currently on your 4600 series jacks made back in 2008 will still fit the HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs # LC736514-4 perfectly as there has not been a design change. This will get you the replacement jacks you need without having to spend quite a bit of money on the new motors.
view full answer... - Replacement Cap Kit For HappiJac Truck Camper Jack 4220Yes, Replacement Cap Kit for HappiJac Manual Truck Camper Jacks # LC183332 is the correct kit. This is for your Replacement Jack # LC736514 (4220) or the complete setup HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs # LC736514-4 (which is 4 of 4220).
view full answer... - 2018 Lance 650 Replacement Recommendation for Atwood JacksThanks for all of the details! For your application you're going to want the 8.8K HappiJac Truck Camper Jack System which comes both in manual and electric configurations: - Manual # LC736514-4 - Electric # LC736514-ELKIT Then for swing-out brackets you need 2 of the Swing Out Extension Bracket Kit # LC182496. I'm pretty sure the mounting brackets that come with these won't match what your Atwood jacks used so this will be a completely new install.
view full answer... - Truck Camper Jack Replacements for 1998 Big Foot Truck CamperYour truck camper jacks are more than likely obsolete due to the age of your 1998 Big Foot truck camper. So unless they have been updated already you will need a new set of jacks. You can replace them with a HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. This kit will allow you to operate each jack individually or control them all at once via the remote control. You can also go with a HappiJac Manual Truck Camper Jack System # LC736514-4. To operate these you will need...
view full answer... - How Does Happijac Camper Jack Attach to CamperOn the camper you'd have a set of the Happijac Z-brackets like part # LC182493 installed which is what the jacks like part # LC736514-4 attach to.
view full answer... - Converting HappiJac 4200 and 4160 Manual Jacks into Electric JacksThe replacement manual jack for the 4200 and 4160 jacks are the HappiJac Manual Truck Camper Jack System, part # LC736514-4. We have the electric upgrade kit for this part, so we have the upgrade for you. Because your camper is already pre-wired, you can get the version without the wiring, which is part # LC733960. I called HappiJac to get an installation manual for you. They did not have one, but they were able to get a wiring diagram for me, which I have emailed to you separately. I've...
view full answer... - Which Manual Hand Crank Works With HappiJac Manual Truck Camper Jack System LC736514-4?To get a hand crank compatible with the HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs # LC736514-4 you were looking at you will just need to order the Manual Crank # LC182436. This will allow you to raise and lower the jacks when you are needing to remove or install the truck bed camper in your truck. I included a video of the # LC182436 for you to take a look at.
view full answer... - Replacement HappiJac Camper Jacks Option For A 1997 Northstar Pop-Up Camper I went ahead and reached out to HappiJac, and they were able to determine that based off of the age of your jacks, the Replacement Bevel Gears for HappiJac Truck Camper Jack Systems # LC182851 will not work for you. Instead, they are recommending that you upgrade your jacks with the: -HappiJac Manual Truck Camper Jack System # LC736514-4. These jacks have an overall weight capacity of 8,800lbs, is made in the USA, and also includes the mounting brackets, which is designed to fit most...
view full answer...
- Camper Jacks for Storing Camper on DrivewayThere are camper jacks that will allow you to take your camper off your truck bed easily, but there is nothing with wheels as that would not be stable enough so they do need to remain stationary. To choose the right camper jacks, you need to know the weight capacity you need, and can choose from either manual or electric jacks. The best jacks are the HappiJac because they permanently install, have the highest weight capacities, and you even have the option of electric jacks for the easiest...
view full answer... - Availability Of Atwood Camper Jacks Wired Remote ControlUnfortunately, Atwood is no longer in business and their camper jacks are no longer available. So I am afraid a replacement remote is also not available. I know this is probably not what you wanted to hear, but at this point if the jack has ceased to function, we would have to recommend replacing the jack entirely. There are going to be a few options for replacements and I have listed a few of those below. - Brophy Heavy Duty Cable Camper Jacks - 57" Max Lift Height # CXHD - Brophy Heavy...
view full answer... - Do HappiJac Swing Out Extensions work on Hallmark CamperThe Happijac Swingout Extensions part # LC182496 do fit your 2005 Hallmark camper and work with the following jack setups # LC736514-4, # LC736514-ELKIT, # LC736515-4 and # LC736515-ELKIT. You'd have to compare what you have now to these kits to see if they are a correct match. We do not have 2 inch extensions at this time.
view full answer... - Will The HappiJac Swing Out Extensions LC182496 Fit A 2006 Lance 951 Camper?The Swing Out Extension Brackets # LC182496 are designed for use with the HappiJac Truck Camper Jack Systems # LC736514-4, # LC736514-ELKIT, # LC736515-4, and # LC736515-ELKIT. If you have one of these kits on your 2006 Lance 951, then you can definitely use them. On the other hand, if you do not have a HappiJac system on your camper, I cannot recommend using them, unfortunately. This is also the only swing out bracket we currently carry, so if you do have a different manufacturer, you...
view full answer... - Powered Conversion Kit For 4150 And 4500 Model HappiJac Truck Camper Systems The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is compatible with with your 4150 model but not the 4500 so you would need to replace them system. The HappiJac Manual Truck Camper Jack System # LC736514-4 replaces both models and is compatible with the conversion kit.
view full answer... - Recommended Replacement for HappiJac 4100 Camper JacksYes. Your HappiJac 4150 can be replaced with the HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs # LC736514-4. If you want to add the electric operation and motors to these jacks you can use the Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524, which will turn this manual jack system into electric jacks.
view full answer... - Compatibility of HappiJac Motorized Upgrade System With Other Manufacturers Slide-In Camper JacksLippert, the manufacturer of HappiJac camper jacks tells me that the HappiJac # LC733960-182524 conversion kit is only compatible with the HappiJac # LC736514-4 and # LC736515-4. Your best bet for a motorized camper jack kit we offer would be the HappiJack # LC736514-ELKIT for an 8800 lb system or # LC736515-ELKIT for a 11200 lb capacity.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.