Quick Release Cross Bar Needed for a Roadmaster Falcon 2 Tow Bar Towing a 2007 Honda CRV

Question

Question:

I ordered the base plate receiver kit for my 2007 Honda CRV and installed it just fine. I am using a Falcon 2 tow bar that I need to order the correct crossbar for the Honda. Please help. Thanks

asked by: Mike B

0

Expert Reply:

The RoadMaster Falcon 2 Tow Bar - 6,000 lbs, item # RM-520, is designed to be used with, included, Quick disconnects and a quick disconnect cross bar like the Roadmaster Quick Disconnect Tow Bar Base Assembly, item # 910021-00, that you mentioned. This replacement base assembly comes with the support bar, a pair of quick disconnects and the 2 pins that attach the tow bar to the cross bar.

If you have the original cross bar with your Falcon 2, you should only need to use a set of car side quick disconnects, item # RM-222, to attach the Falcon 2 to your CRV.

I am glad you got the base plates installed easily, one item you may need to consider if you do not already have them is safety cables. I have included a link to our tow bar safety cables for you to review below.

expert reply by: Robert G

0

Answer 1

Towing a vehicle requires a tow bar, base plate kit, wiring for taillights and safety cables. You should start with the base plate kit for the vehicle you will be towing. This is a custom fit bracket kit that attaches to the front of the towed…

view full answer...

Answer 2

The break strength of the CargoSmart Horizontal or Vertical X-Track #3481787 is 2,000 lbs which E-track on the other hand has a break strength of 6,000 lbs like the part #E19148. Working load limit for the E-track is 2,000 lb. The longer sections…

view full answer...

Answer 3

The original Falcon tow bar, the Falcon 5250, has been discontinued for a few years now and was replaced by the Falcon 2, #RM-520 with upgraded components. Otherwise it functions basically the same was as the original Falcon. Both are RV mount tow…

view full answer...

Answer 4

In order to mount and unmount your Sears X-Treme 16 Cargo Box 90033 more easily, I recommend using Mounting Hardware part #TH05603. This system still utilizes a u-bolt design but instead of threading a nut onto each side of the u-bolt you can simply…

view full answer...

Answer 5

Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…

view full answer...

Answer 6

Hi Garry; we have exactly what you are looking for regarding wiring for your 2015 Kia Soul for flat towing: - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 - Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25

view full answer...

Answer 7

The Roadmaster StowMaster Tow Bar #RM-501 is compatible with the Roadmaster Crossbar-Style Base Plate Kit #118-15 so you shouldn't need any other components aside from some safety chains, like part #RM-643. If your StowMaster doesn't have the…

view full answer...

Answer 8

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 9

No, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56200 is sending power to the lights and not pulling power from them to send out to the 4-pole connector. There are plug-in style trailer wire harnesses available though that I can…

view full answer...

Answer 10

I am happy to help you setup your 2020 Lincoln Nautilus for towing. You are going to need a receiver hitch, wiring harnesses with a 7-Way connector, brake controller, and a ball mount. I recommend the Curt Trailer Hitch Receiver Item #C78KR. This is…

view full answer...

Answer 11

The Roadmaster Battery Charge Line Kit part #RM-156-25 would be the kit you would need to charge the battery of your 2015 Nissan Xterra when it is being flat towed. This type of charge setup does not require a diode nor does it have potential to…

view full answer...

Answer 12

The Roadmaster EZ Base Plate Kit #52728-1 does require you to use a crossbar with your Roadmaster Falcon All Terrain, Non-Binding Tow Bar #RM-522. You will need the Replacement Quick Disconnect Crossbar Assembly #910021-00 if you do not currently…

view full answer...

Quick Release Cross Bar Needed for a Roadmaster Falcon 2 Tow Bar Towing a 2007 Honda CRV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching