Brophy D-Ring Tie-Down Anchor with Backing Plate Review Video

I verified with the manufacturer for you that the thickness of the RV Vinyl Flooring - Diamond Pattern - 24' Long x 8'2" Wide Strip - Black #TS89FR is .075 inches

The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…

I can absolutely help you and make a recommendation. The floor of your Big Tex 70 car trailer is an 1/8 diamond steel plate. The 1/8 plate will be fine for a tie down point for anything but a car. You need a bracket not to fasten something down…

I would recommend to use the treated torx screws for ACQ (Alkaline Copper Quaternary) treated wood for better corrosion and rust resistance. The treated torx screws like the Redline 2-1/2 Inch Long Torx Trailer Screw for ACQ Treated Wood, part…

No, it does not matter which wire you use for the ground and which is used for power when wiring electric brakes. Each can be used for either purpose.

The 1.18 inches that is in the product description is taken from the back side of the E-Z Lube Grease Caps #RG04-010 that lodges inside the E-Z Lube Dust Cap. See attached photo.

Those are the wires for the brake magnets. You will need to connect the black wire to the brake controller output wire on your trailer connector and you are correct the white wire will need to be grounded to a clean metal surface on the trailer. I…

There is indeed a wishbone harness included with the #TLL9RK Light Kit. The running light circuit is split into two separate circuits, one for each side of the trailer. I just got done installing this exact kit on my PWC trailer about a month ago. It…

The holes of the backing plate part #BP1D are round so you wouldn't actually use a carriage bolt. Instead you'd use a standard nut and bolt. 5/8 inch diameter would work great.

The bolt on the Brophy D-Ring Tie Down Anchor #DR01 measures 3" long x 9/16" diameter. The best way to mount it is with the Backing Plate #BP1D. There is not a specific T-nut available to mount this in the channel on your trailer.…

The Class V hitch we have for your 2004 Dodge Ram 2500 with the best ground clearance is the Curt hitch part #C15809. It doesn't tuck right under the rear bumper like what you can see in the attached picture but it does sit the highest.

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.