Rackem Spare Tire Rack Review Video

I verified with the manufacturer for you that the thickness of the RV Vinyl Flooring - Diamond Pattern - 24' Long x 8'2" Wide Strip - Black #TS89FR is .075 inches

There really isn't a profile difference between the tapered style of Tow Rax L-Track like the part #TWSP12TAB and the low profile #TWSP72TA. The low profile does sit a little taller at 1/2 inch tall whereas the tapered is 7/16 inch. That's a…

Tow-Rax Low-Profile Floor Track for Tie-Down Anchors - Aluminum - 6' Long - Machined - Qty 1 #TWSP72TA. This system when using the Tie-Down Anchor for Tow-Rax Low-Profile Floor Track - 1,666 lbs - Qty 1 #TWSPDSTD225 have a working limit of the…

The mount stud tie-downs #TWSPDSTD225 will work with Tow-Rax Low-Profile Floor Track for Tie-Down Anchors #TWSP72TA. When using the #TWSPDSTD it has a breaking strength of 5,000 lbs and a working strength of 1,666 lbs. I attached a review video for…

For the tire size ST225/75-15 in the Load Range D like the part #274-000029 the weight capacity is 2,540 lbs at 65 psi. Which with just four of these you'd be over the 10k GVWR of the trailer you mentioned so you should be fine.

The tow loops on the Curt Front Mount Trailer Hitch Receiver part #31180 are recovery points that you can hook a tow strap to like part #EM59700 and pull yourself out with if you ever get stuck. They are rated for 9,000 lbs each just like the…

Yes, the Tow-Rax L-Track #TWSP24TA and the Erickson O-Track #EM59133 are the same when it comes to dimensions so you can interchange the accessories.

The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram.

The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram. I couldn't find any information on the ANCOR brand so you would need to compare what you have to those dimensions to know if the accessories…

The Tow-Rax Removable Wheel Chock #TWSPWC3BT can be installed on either wood or metal surfaces using the included hardware kit. You will need a drill with 7/16-inch bit for wood floors or a 9/16-inch bit for metal floors as well as a 3/16-inch bit.…

I have good news, our trailer jack that has a 2 inch outer diameter part #DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity…

For your 1999 Jayco Glacier Heritage trailer, I recommend the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson #DL22530. This is the only jack we have that has that 2 inch outer diameter upper tube. For a foot you'd want the part…