Lippert Solera Standard Flat Awning Support Arm Installation - 2017 Forest River FR3 Motorhome Video

The awning does act as the roof for the Solera Family Room #LC362235. If you plan on repairing your fabric please use the Repair Tape #CAM42623 rather than duct tape. This tape is specifically designed for use on the awning material and will not…

Thank you for the picture of the info tag on your Solera awning arm. Based on that we know that the correct Replacement Short Arm Assembly is the part #LC404523 that you referenced.

You can use the Replacement 20' Wide Roller w/ Fabric for Solera RV Awnings - 8' Projection - Solid Black #LCV000211518. This replaces out dated or damaged awning fabric and roller arms.

The replacement arms we offer for RV Awnings are designed to fit the Solera awnings. Finding the correct arm depends on the measurement of the wall-mount extrusion from top to bottom. I have attached a link to the product page on our website you can…

The idler head is the head opposite of the head with the motor on your Solera RV awning setup. The part #LC672052 is the correct replacement for that.

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

I could not locate that exact number (V000613183) but from what I could find, it looks like it comes back to a Solera Awning. If that is the case, then the Replacement Short Arm Assembly for RV Awnings #LC404523 would be the correct replacement for…

We have replacement pitch arms for the Solera 69 inch awning setups like what you have with the part #LC375994 which would be all that you'd need.

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…

I reached out directly to Timbren for you, and they told me the correct fit for your 2021 GMC Sierra 1500 AT4 was indeed the Timbren Suspension Enhancement System #T28MR.

Thank you for the photo; the individual rails are not available separately so you will need to get the Support Arm Assembly such as #LC281154 to replace your bent rail. This assembly has 69" support arms and is to be used with standard awning…