Curt Class V XD Trailer Hitch Installation - 1999 Dodge Ram Pickup Video

For a hitch for your 1990 Ford Bronco you would want the part #C15300. I attached an install video for you to check out as well.

I spoke with my Curt representative, who tells me that the front face of the receiver would sit 10-3/4 inches rearward of the rear-most mounting hole. If you find the rear most mounting hole in the underside of the frame member and measure 10-3/4…

Curt Class V hitch #C15300 is a confirmed fit on your 1987 Ford F-150. To help you determine if it will be compatible with your skid plate I went to our warehouse and took a measurement of the hitch to find out the distance from the mounting…

I checked with Curt and the distance between the vertical mounting flanges of the Curt #C15300 is 33.312 inches.

I spoke with my contact at Curt to obtain the mounting bolt hole locations for the Trailer Hitch Receiver, #C15300 on a 1993 Ford F-150. I have attached a picture to illustrate these measurements. As for repositioning the spare tire, you may need…

If you can't place any weight on the trailer in any way that limits a lot of the options. Basically you'd have to decide if you could fit in in the interior or use a bunk like part #CC-255 as a platform on the tongue of the trailer.…

I really wish we could guarantee a hitch fit but since you have the dump bed and the tank there isn't a way we can verify any of our fits. The Curt #C15511 does fit your 1998 Chevy Cab and Chassis frame and has an 8 inch drop from the hitch tube…

The highest rated available trailer hitches I can find for a 1996 Ford Bronco are Class IV hitches. We carry the CURT Trailer Hitch, #14001. This hitch does not fit cab and chassis models or models with a roll pan bumper. It is a Class IV hitch rated…

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

I spoke with the manufacturer and the Bauer Products Motorhome Door Lock - Black #BA64FR strike plate mounting holes has a 5-1/2" measurement from center to center.

The Bauer Products Motorhome Door Lock, #BA64FR is 5-1/2" X 6-7/8".

I recommend that you first remove the current lock and identify the cutout measurement. I have two optons listed below and which one you need is based on your cutout dimensions. Be aware that entry door locks are not a tight tolerance fit, so the cut…