Trailer Hitch Installation - 1988 Ford F-250 - B and W Video

It looks like you're asking about the B&W Heavy-Duty Trailer Hitch Receiver, part #BWHDRH25122, for your 1996 Ford F-150. You didn't say exactly which dimensions you're looking for but I went out to the warehouse and measured the…

I am unfamiliar with the Barden Bumper and in my research, I could not find any specific information regarding the Barden Bumper. Our trailer hitches are not tested with aftermarket bumpers. We have two bumpers that have been determined to be a fit…

The #BWHDRH25122 measures 5 inches from the frame to the top of the hitch receiver. The #BWHDRH25198 measures 7-3/8 inches from the frame to the top of the receiver.

You are going to need to have a hitch welded to the frame of your 1998 Fleetwood Pace Arrow motor home by a qualified professional welder. The bolt-on hitches we have for RVs are not rated high enough for a gross trailer weight of 6,000 pounds. I…

From the top of the mounting plates to the top of the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25124 receiver is a 5-1/4" drop and then from the rearmost bolt hole to the end of the receiver is 10-7/8" (see attached).

The B and W Hitch part #BWHDRH25122 would fit your 1995 Chevy Silverado 3500 if it was built on a cab and chassis model. Which easy way to determine this is to measure the truck frame from outside to outside. If this measurement is 34 inches then you…

The Buyers Products Class 4 Service Body Short Hitch Receiver #3371801053 has a universal bolt hole mounting pattern. It will fit mounting locations from 28-7/8" to 42-7/8" wide. This Class IV receiver is rated for a maximum tongue weight…

I spoke with my contact at B and W and he informed me that the center section of the B and W Hitch part #BWHDRH25124 measures 31-13/16 inches long measured from outside of flange to outside of flange.

The #BWHDRH25122 has 35-5/8 inches between mounting holes like what you see in the picture I attached. Since you need larger than than let me know what vehicle you have and I can see which would be best fit.

The mounting holes the Curt Trailer Hitch Receiver #14053 measure 38-1/4" and 38-3/4" width-wise and then from the center of the of the forwardmost to the rearmost is 13-1/4". Attached is a dimensional photo for you to reference. This…

Yes, as noted in our fit guide the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25122 is only a fit for the cab and chassis models with 34 inch frames of 1991 Chevy truck. Assuming you have a standard bumper, the correct trailer hitch for your…

I really wish we could guarantee a hitch fit but since you have the dump bed and the tank there isn't a way we can verify any of our fits. The Curt #C15511 does fit your 1998 Chevy Cab and Chassis frame and has an 8 inch drop from the hitch tube…