Trailer Hitch Installation - 2001 Dodge Ram Pickup - Curt C15300 Video

Curt Class V hitch #C15300 is a confirmed fit on your 1987 Ford F-150. To help you determine if it will be compatible with your skid plate I went to our warehouse and took a measurement of the hitch to find out the distance from the mounting brackets…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

A 6,000 pound hitch does seem a bit light for a 1998 Dodge Ram 2500. I looked up the specs on that truck and found that it has a towing capacity of 8,700 to 9,100 pounds gross trailer weight depending on how the truck is equipped. I urge you to…

I spoke with the manufacturer and the Bauer Products Motorhome Door Lock - Black #BA64FR strike plate mounting holes has a 5-1/2" measurement from center to center.

The Bauer Products Motorhome Door Lock, #BA64FR is 5-1/2" X 6-7/8".

The Bauer Products Motorhome Door Lock, #BA64FR, has a pin-to-pin on center measurement of 2-1/2 inches. This is a confirmed replacement for Bauer BP-12RVLP or Trimark 060-0650 standard entry door latch.

I recommend that you first remove the current lock and identify the cutout measurement. I have two optons listed below and which one you need is based on your cutout dimensions. Be aware that entry door locks are not a tight tolerance fit, so the cut…

For your 1997 Ford F-350 with the smaller black power mirrors we have the CIPA towing mirrors part #CM11500 as a confirmed fit that will give you the wider viewing angle you are looking for. I attached an review video for these plus an install…

A leaf spring like the part #e28SR has a distance of 25-1/4 inches between the spring eyes. I did some checking and the hanger kit you would want is the Single-Axle Trailer Hanger Kit #APS4. And the distance between the spring hanger centers should…

For your double eye springs that are 25-1/2 inches, it is likely your hangers are 29-1/2 inches apart on center and your springs most likely were originally 25-1/4 inches as they will stretch slightly over time. For instance if you were to use 25-1/4…

To determine the correct length of leaf spring on a 7,000 lb axle, all you have to do is measure from the center of one spring eye to the center of the other spring eye. Keep in mind your current springs will have elongated a bit over time so you can…

I assume by flip, you mean you moved the leaf springs to the top of the axle. If this is the case, then all of the springs should sit the same. There are a few things you can check to ensure everything is in place. If you had to weld on new hangers…