Dimensions for Curt Hitches 15300, 15511, 15318, 15319

Question

Question:

need measurements for 15300,15511,15318,15319. top of mount to top of tube, edge of mounting flange back of frame to end of tube receiver mounting width have 37 1/4 frame, outside to outside, and bolt holes would be nice

asked by: Vera D

0

Expert Reply:

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Your 2012 Express Shuttle Bus would be built on the cutaway chassis version of the 2012 Express Van so that means the correct hitch you'd need is the Buyers Products part #3371801102 which was made for this style of chassis. I attached a…

view full answer...

Answer 2

I went and grabbed both hitches that you referenced to get the dimensions you asked about. If you check out all the attached pictures you will see the dimensions you are looking for the Curt #C14006 and #C15323.

view full answer...

Answer 3

I reached out to my contact at Curt and was able to get a dimension sheet for the Curt Trailer Hitch Receiver - Class V #C15810 referenced in your question. I have attached an image of it for your review. This trailer hitch is designed to fit…

view full answer...

Answer 4

To use the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube #41990 on your 2015 Ford E-350 Cutaway you are going to need to measure to determine if you need the 7" Weld-On Bracket Kit #4907 or 16" Weld-On Bracket Kit…

view full answer...

Answer 5

I was able to obtain from Curt a chart showing key dimensions for their 3-Piece Trailer Hitch #C15511 (and other hitch models) that I linked for you. This shows that for hitch #C15511 the overall front-to-back length is just under 24-inches. The…

view full answer...

Answer 6

I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver #41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting…

view full answer...

Answer 7

The mounting flanges of the Curt hitch part #C15800 are 11.6 inches in length. This is a fit for your 2022 Chevy Silverado 2500 cab and chassis model.

view full answer...

Answer 8

I attached a picture that has basically every dimension of the Curt hitch part #C13161. It will hang down 8.28 inches from the mounting surface. From the rear mounting flange to the hitch opening it measures 15-3/4 inches.

view full answer...

Answer 9

The Curt Trailer Hitch Receiver #C15320 is 40-1/4" across and from the top to the top of the crosstube measures 1-15/16". This hitch is only a fit for certain model year Chevy Express and GMC Savana cargo and passenger vans.

view full answer...

Answer 10

The Curt hitch part #C13900 that you referenced is designed to fit frame widths that range from 31 to 41 inches in width based on the holes you use. Check out the picture I attached to see how the holes match up with frame widths as well.

view full answer...

Answer 11

The correct quick splice harness needed to install a brake controller in a 20014 Ford F-350 is the part #3035-P. I attached a picture that shows how the connector of it would match what you have in your truck. This could be used as a guide or you…

view full answer...

Answer 12

Yes, the Curt Trailer Hitch Receiver part #C15312 is a confirmed fit for your 2007 Chevrolet Silverado 3500 Dually 4x4. The Curt Trailer Hitch Receiver is a direct bolt-on fit which means no drilling or cutting is required. If you need a trailer…

view full answer...

Dimensions for Curt Hitches 15300, 15511, 15318, 15319

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching