Fastway e2 Weight Distribution System Installation - 2010 Ford F-150 Video

Yes, we do have weight distribution system shanks that have more drop than what you have now so that your trailer can sit level. For that you could use the part #C17123 which works with your e2 system and can do a drop of up to 8 inches.

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I…

The trailer hitch I recommend for a 2002 Toyota Sequoia is the Curt Trailer Hitch Receiver part #13440. The torque specifications for said hitch are currently listed as 86 ft-lbs. for M12 fasteners and 110 ft-lbs. for 1/2" fasteners. These…

Lippert does not offer a replacement inner jack tube for their jack 1817941. When a jack is damaged in this way (which is more common than you want to know) it really is best to replace the entire jack for safety reasons. The outer tube on your…

When choosing the best weight distribution system for your trailer you will want your total tongue weight (TTW) which is composed of the loaded ready to tow weight of the trailer by any cargo stored behind the rear axle of the tow vehicle to fall…

I reached out to a representative of Yakima who told me the Custom Fit Kit for Whispbar will not fit a 2010 Toyota Tundra; it is designed for Chevy and GMC trucks. If you are looking for a roof rack for your Tundra and have either a Double Cab or…

The arms on your Fastway e2 Weight Distribution System #FA94-00-0800 can be removed by either pulling on the keeper tab to release them, or by swinging them outward to be perpendicular to the tow vehicle. At this point, the arm should drop freely…

7-Way trailer connector #HM42190 for a 2001 Jeep Grand Cherokee looks similar to a 4-Way but the end that plugs into the vehicle has 7 pins in it for the 7 functions on the connector. It is not a confirmed fit though unless the vehicle originally…

There are a number of high-quality weight distribution hitches that will work with a 400 lb tongue weight such as the Equal-i-zer #EQ37060ET, which is rated for total tongue weights between 300 and 600 lbs. However, in order to choose the best…

Whenever you tow a trailer, or put a lot of weight on the rear of your F-150 the leaf springs start to flatten out, and typically the ride geta very stife. Not to mention the sag in the rear end. The back goes down, and the front raises up. Which…

The best suspension enhancement we offer for your 2018 Ford F-150 that is towing would be the RoadActive Suspension kit part #RAS3611-YHD. This will give you the support to prevent the porpoising, will improve ride quality and stability, and will…

What you need for your boat trailer is a pole tongue adapter like part #RP58393. This product is designed to work on trailers with straight tongues just like your boat trailer. I attached a picture of what it looks like installed. The best way to…