Replacement 3500-lb Electric Tongue Jack for Lippert 1817941

Question

Question:

will part UF38-751160, Ultra-Fab replacement inner tube assembly fit lippert tongue jack model 1817941. The lippert jack was used only a few times before my son pulled out of a site with the jack fully extended, the outer tube was not damaged, however the inner tube cannot be straightened.

asked by: Norman

0

Expert Reply:

Lippert does not offer a replacement inner jack tube for their jack 1817941.

When a jack is damaged in this way (which is more common than you want to know) it really is best to replace the entire jack for safety reasons. The outer tube on your jack may indeed appear to be perfect but could have hidden damage/stress.

The equivalent current replacement jack for yours is part # LC285318.

expert reply by: Adam R

0

Daniel M.

4/3/2020

How do you grease the greed?

Reply

Chris R.

4/5/2020

There's honestly not a really good way to lubricate the internal gears on the Lippert Electric Jack # LC285318. There aren't any integrated grease fittings, so the best you can do is extend the jack as far as it can go and spray some lubricant up the inner leg every once in a while.

Reply

Answer 1

I do have an option for you, however there is not a replacement motor available for your Lippert model 1817941 Electric A-Frame Trailer Jack. I recommend simply replacing the jack itself with the Lippert Electric Trailer Jack #LC285318, which is…

view full answer...

Answer 2

If the manual crank handle for the Lippert Electric Trailer Jack part #LC285318 will not extend or retract the leg then that points to signs of internal damage. The bevel gear could be stripped or the inner tube could be bent which would both…

view full answer...

Answer 3

To install the Dometic water heater part #DMC74FR in place of your current Dometic setup what you need is the adapter part #DMC24FR and you'd be set.

view full answer...

Answer 4

I checked and found the manual for the Lippert Electric Trailer Jack #LC285318 and there was no mention of anything going in the hole beforehand to tighten them. I added a cut out of the manual for you which shows the parts for this jack, and it does…

view full answer...

Answer 5

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 6

To replace the extend/retract switch on your Lippert 181794 Electric Trailer Jack you'll simply need the Replacement Extend/Retract Switch for Lippert Electric Trailer Jack #LC49MD. If you're needing to replace the on/off or just both…

view full answer...

Answer 7

One solution that seems to work well with the factory hitches of the 2017 Chevy Silverado 2500 would be shackles like the #358smallshackle which you'd attach to the loop on your hitch and then attach the safety chains to.

view full answer...

Answer 8

In order to choose the correct jack for your trailer, you must first determine what type of jack you will need. You can choose from either an a-frame jack or side mount jack. Once the correct type of jack is selected, you can then begin to narrow…

view full answer...

Answer 9

I have a solution for you but they do not offer just the lens for individual sale. You will need to use the Replacement Bottom Jack Cover with Light Lens for Lippert Electric A-Frame Trailer Jacks item #LC23UD. This will replace the lens and the…

view full answer...

Answer 10

While you technically could mount the Empire Faucets Quick Connect Shower Valve #EM84JR to the outside of your trailer there are a few reasons why you would want to use a box instead. With the knobs being exposed on the outside of the trailer you run…

view full answer...

Answer 11

I have the perfect toilet option in the Dometic Weekender RV Toilet part #DOM24FR which is compact at 15-1/2" tall x 19-1/2" long. It is like most RV toilets designed to dump directly into the waste tank. It uses very little water and is…

view full answer...

Answer 12

I spoke to my contact at Lippert about wiring the toggle switches for the Lippert Electric Trailer Jack #LC285318. They stated that they don't have any schematics on this unfortunately but what we were able to do is snap a photo of the back of…

view full answer...

Replacement 3500-lb Electric Tongue Jack for Lippert 1817941

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching