How to Determine Hanger Spacing on a Tandem Axle Trailer
Question:
I need some help. I have 26inch 4 leaf double eye springs. I am making my trailer a tandem axle trailer and need to know the spacing for the hangers. The center hanger is 3 1/4inch inches to the center bolt and the front and rear hangers are 1 1/2inch to the bolt hole. The equalizers are 5 3/4inch from hole to hole. What would the spacing be from center hanger to the front and rear hangers, thank you?
asked by: Sal A
Expert Reply:
It depends on the leaf springs you are using. Basically you will need to mock it all up before permanently installing anything on the trailer. Generally speaking the distance between hangers would likely be 24-3/4 inches on center to 29-1/2 inches on center but again it depends on the springs being used. These are just rough guide lines and really the only way to get the right spacing for a given trailer is to mock everything up and adjust as needed.
Also, even though you asked about hanger spacing and there isn't a specific measurement the spacing has to be, I have also included a picture that explains how to determine axle spacing.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Q&A: Wet Bolts Replacement for Dexter EZ Flex Equalizers
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Video: Review of etrailer Trailer Leaf Spring Suspension - Spring Mounting Hardware - APT8
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Article: Double-Eye Trailer Suspension System Review
- Q&A: What Are The Two Upper Holes In Short Hangers In Tandem-Axle Trailer Hanger Kit APT8 For?
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - AP233 Review
- Video: Dexter Heavy Duty Suspension Upgrade Kit Installation - 2021 Grand Design Imagine Travel Trailer
- Search Results: apt8
- Search Results: sp~220275
- Video: Review of etrailer Trailer Leaf Spring Suspension - 4 Leaf Double Eye Dacromet 5000 lbs Axle - e28SR
- Video: Dexter Heavy Duty Suspension Upgrade Kit Review
- Video: Review of Dexter Trailer Leaf Spring Suspension - Suspension Kits - K71-359-00
- Search Results: trailer leaf springs
- Search Results: leaf spring
- Search Results: 20400
- Search Results: axle hanger
- Q&A: Does Trailer Axle Need to be Moved Forward?
- Search Results: k71~652~00
- Q&A: Installation of Hanger Brackets and Springs for Tandem Trailer Axles
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT5 Review
- Q&A: Tandem Axle Hanger Spacing for Double Eye Springs 25-1/2 Inches
- Q&A: Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit