Fifth Wheel Hitch Kit Installation - 2000 Ford F-350 Pickup Video

There are no adjustments that can be done to the bolted on feet on the bottom of the Reese Square Tube Slider, part #RP30048. You can check the measurement of the feet to make sure they are square and located correctly. Measure from the front left to…

Your Reese 15K Classic 5th wheel hitch head will fit the Reese Square Tube Slider #RP30048. Per Reese they have not changed the mounting hole dimensions for their 5th wheel hitches. The front to back bolt holes are 4" on center for this slider…

Both of the Reese Quick-Install Custom Base Rail Kits, part #RP50082-58 and part #RP56005-53, are compatible with the Reese 5th Wheel Trailer Hitch #RP30033 and the Anderson Ultimate Connection #AM3200. They will both fit on your 2004 Ford F-250 as…

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

If the hitch model you referenced is the Lil Rocker, it will fit in Reese 5th wheel rails. For an installation kit that will also fit your 2009 Ford F-150, I recommend the custom installation kit #RP50081-58 that you have referenced. The custom…

If you were using the slider assembly part #RP30048 as the base for your fifth wheel hitch setup you could operate the slider with the full weight of the trailer on it. There would be no need to disconnect the trailer every time you needed to use it.…

I spoke to a contact at Horizon Global and they told me the height for the Reese Square Tube Slider for 5th Wheel Trailer Hitch #RP30048 will be 14" - 17" with the hitch installed.

Due to the slider mechanism you lose the ability to use the setting that would put the hitch in the lowest position when attaching a head to the Reese Square Tube Slider #RP30048. That shouldn't be a problem for you since you said you need to…

Assuming that your 2007 F150 is the short bed model with the 6 foot 6 inch bed, using the 16K slider hitch should present no particular problem with your fifth wheel trailer. Although the slider will gain you more clearance between the rear of the…

At the present time we do not have a video showing the installation of #RP30035 on a 1989 Ford F250 long bed. However I have attached the installation instructions for part #RP30035 for you at right. The rear rails should sit 32-1/2" from the…

In order to install the RBW Lil Rocker 15K 5th Wheel Trailer Hitch on your 2002 Ford F-250 you will want to use either the Reese Quick-Install Custom Installation Kit part #RP50082-58 which is a no-drill option or the Reese Universal Base Rails and…

Turning clearance is always going to be best with a long bed truck. Trucks with long beds are more designed for towing, and there are less of them on the market today because more people are buying trucks for reasons other than towing. If I were…