Best 2017 Toyota Highlander Trailer Wiring Options Video

To determine if a 2017 Toyota HIghlander has a factory towing harness, start by opening up the rear hatch. Then, lift up on the rear compartment panel and pull it out. Remove the two driver-side panels by pulling up on them. There, you may see a…

To add a hitch to your 2017 Toyota Highlander, I recommend the etrailer item #e98844. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver. This hitch has a 6,000 lbs towing…

I'm happy to help you get what you need for towing. I did a little research to find your 2017 Toyota Highlander SLE AWD towing capacity to be 5,000 lbs. Based on that, you will not have an issue with a 3,850 lb travel trailer with 400 lb…

To add a 7-Way connector to your 2017 Toyota Highlander, I recommend the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your…

To add a 7-Way connector to your 2017 Toyota Highlander which already has a 4-Way installed you will just need a few parts. First for the 7-Way you can use #37185. This will add the 7-Way and retain the 4-Way should you need it. If your trailer does…

If you have the factory tow package and have a converter under the dash of your 2017 Highlander the wiring harness I recommend is the Curt T-Connector Vehicle Wiring Harness, part #56042. This simply plugs into the factory tow package wiring harness…

Yes, the etrailer Trailer Hitch Receiver #e98844 does fit both the hybrid and non-hybrid versions of the 2018 Toyota Highlander. I have added a link to a video install of the hitch on a 2018 Toyota Highlander for you to check out.

Finding someone to install a trailer hitch on a vehicle like your 2019 Toyota Highlander isn't too difficult since hitch installs are relatively very easy for mechanics. The trick is to find a local garage to you with a decent reputation and…

To prevent the need for any drilling or modification to your Highlander, I recommend using our No-Drill Long Mounting Bracket, #18136. This bracket comes with a steel clamp that will secure the bracket to the crosstube of the hitch. The bracket that…

For your 2017 Toyota Highlander that has a full sized spare, I recommend the Draw-Tite Class IV Max Frame Round Tube Receiver Hitch #DT65MR. This hitch is custom-fit for your vehicle and will allow your full size spare tire to remain stowed under the…

The etrailer hitch #e98844 is my recommendation for your 2019 Toyota Highlander. Because of that I think it's the obvious choice for your Highlander. It has an attractive black matte finish, a great towing capacity, and can be used with a weight…

Luckily, rather than trying to understand the VIN check, the easiest way to determine if your Highlander is equipped with the taillight converter is to get a quick peek at the 10-pin connector it would plug into. The connector is located under the…