Tekonsha OEM Replacement Vehicle Wiring Harness Installation - 2019 Toyota Highlander Video

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

I'm really sorry to hear that your '14 Highlander got totaled and hope every one involved is ok! For your new 2020 Toyota Highlander Limited I recommend going with the Curt #C45CR as it's one of few hitches for your vehicle that's…

To connect the reverse wire from the Tekonsha OEM Replacement Vehicle Wiring Harness #TK57VR to your 2022 Toyota Highlander you'll need to route it up the paneling at the back of your Highlander, through the boot that connects from your vehicle…

There is not a 25-amp fuse or fused connection with the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector #22119. The kit comes with two 30 amp fuses, a 15 amp fuse, and a 10 amp fuse. The 30 amp…

You will want to select the grommet around the steering column and feed through that. The correct Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter for a 2021 Toyota Highlander is #TK57VR. Please note the linked installation…

The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector #22119 will have the connectors behind the side trim panels in the cargo area on the driver and passenger side. Farther to the sides behind the…

No, you will not have to uninstall and then reinstall the wiring on your current 6-Way or 7-Way wiring harness to use the Trailer Connector Mounting Box part #18159.

The best way to mount your 7-way on your Curt #C45CR is with the Curt No-Drill Bracket #C57202. The hose clamp will wrap around the cross tube on your hitch and allow you to mount a bracket like the #PK12711U to hold your 7-way connector.

To determine if a 2017 Toyota HIghlander has a factory towing harness, start by opening up the rear hatch. Then, lift up on the rear compartment panel and pull it out. Remove the two driver-side panels by pulling up on them. There, you may see a…

Since your 2020 Toyota Highlander has the factory towing package the correct trailer wiring kit is the part #22119 which will give you a 7-way harness. This kit (and any other option) does require the harness have the power wire ran from the rear to…

To add a 7-Way connector to your 2017 Toyota Highlander which already has a 4-Way installed you will just need a few parts. First for the 7-Way you can use #37185. This will add the 7-Way and retain the 4-Way should you need it. If your trailer does…

I would be happy to clarify things for you and make a couple of recommendations. You will want to use the Tekonsha item #TK57VR over the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The Tekonsha is custom fit and will plug…