Trailer Wiring Harness Installation - 2017 Toyota Highlander 118449 Video

To determine if a 2017 Toyota HIghlander has a factory towing harness, start by opening up the rear hatch. Then, lift up on the rear compartment panel and pull it out. Remove the two driver-side panels by pulling up on them. There, you may see a…

I recommend the etrailer Trailer Hitch Receiver part #e98844 for the 2019 Toyota Highlander which is confirmed to fit the hybrid model. I have attached a video for your reference. For the wiring, I recommend Tekonsha T-One Vehicle Wiring Harness with…

I'm happy to help you get what you need for towing. I did a little research to find your 2017 Toyota Highlander SLE AWD towing capacity to be 5,000 lbs. Based on that, you will not have an issue with a 3,850 lb travel trailer with 400 lb tongue…

For your 2017 Toyota Highlander that has a full sized spare, I recommend the Draw-Tite Class IV Max Frame Round Tube Receiver Hitch #DT65MR. This hitch is custom-fit for your vehicle and will allow your full size spare tire to remain stowed under the…

Finding someone to install a trailer hitch on a vehicle like your 2019 Toyota Highlander isn't too difficult since hitch installs are relatively very easy for mechanics. The trick is to find a local garage to you with a decent reputation and…

Yes, the etrailer Trailer Hitch Receiver #e98844 does fit both the hybrid and non-hybrid versions of the 2018 Toyota Highlander. I have added a link to a video install of the hitch on a 2018 Toyota Highlander for you to check out.

To install a 7-way wiring kit on your 2018 Toyota Highlander the #22119 that you referenced is the correct part number. This plugs in to the wiring your 4-way already plugs into. I attached an install video for this on a similar 2018 Highlander for…

The 6" Wide Continuous Hinge - 6' Long, #MA52VR is not provided from the manufacturer with a load rating. This for the fabricator to evaluate if this component meets needs of the intended application.

If your 2017 Toyota Highlander does indeed have the factory tow package, I recommend the Curt T-Connector Vehicle Wiring Harness #56042. This will easily install a 4-Way trailer connector by connecting to the existing port located behind the…

This Hopkins wiring harness does fit your 2019 Toyota Highlander. Since the location of the factory wiring is located inside the car and not under/behind the bumper, you will likely be limited to the current location of the wiring. That being said,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The hitch I recommend for your 2018 Toyota Highlander is the Curt Class III hitch part #C13394 because it's mostly hidden, has great towing capacities (more than you'd need), installs easily, and is priced great too. I attached an install…