Does etrailer Trailer Hitch Receiver Fit 2018 Toyota Highlander Hybrid and Non-Hybrid

Question

Question:

2018 highlander hybrid. Does the hybrid take the same hitch as the non hybrid?

asked by: Ed

0

Expert Reply:

Yes, the etrailer Trailer Hitch Receiver # e98844 does fit both the hybrid and non-hybrid versions of the 2018 Toyota Highlander.

I have added a link to a video install of the hitch on a 2018 Toyota Highlander for you to check out.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Finding someone to install a trailer hitch on a vehicle like your 2019 Toyota Highlander isn't too difficult since hitch installs are relatively very easy for mechanics. The trick is to find a local garage to you with a decent reputation and…

view full answer...

Answer 2

To determine if a 2017 Toyota HIghlander has a factory towing harness, start by opening up the rear hatch. Then, lift up on the rear compartment panel and pull it out. Remove the two driver-side panels by pulling up on them. There, you may see a…

view full answer...

Answer 3

You want the best, because there can be only one. But the best depends on what you're using it for or what appeals to you. Basically, I've narrowed it down to two options. The best for actual use is the etrailer Hitch #e98844 because if…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver part #C13394 is a great option for a 2018 Toyota Highlander. It does sit behind the bumper to help remain hidden but not so much so that it should cause any issues with clearance of hitch mounted accessories like a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...