Arched Loading Ramp Review Video

The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…

What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement in that area. These are 65…

For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part #EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that…

I had the Stallion ATV Ramps #288-07432-2 measured and the spaces are 2 3/4 by 4 3/4. I included a picture of how they were measured as well. The red is 4 3/4 inches and the blue is 2 3/4 inches.

We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The included…

I confirmed with Stallion that the thickness of the Arched Loading Ramp Set - Center Fold - Aluminum #288-07432-2 when stacked on top of each other is 6 inches when folded at the center.

The Stallion #288-07432-2 folding cargo ramps are manufactured in China. If you'd prefer a US made alternative, I'd recommend the Gen-Y #325-GH-R84 84 inch long aluminum loading ramps. If you click the provided link, you can see a product…

I have a solution for you, but unfortunately the Arched Loading Ramp #288-07432-2 set have a maximum safe height of 35", so they would not work for your 37" tall truck bed. You may want to try the Erickson Arched, Aluminum Loading Ramp Set…

I actually really like the Arched Loading Ramp Set #288-07432-2 you're looking at. Together these ramps can handle up to 3,000 lbs, and they measure 18" wide which should work out really well for your Gator. We actually have a review where…

Yes. You will be able to use the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs #325-GH-R84 with your 1-3/4" lip. Since the gap between the hook and the ramp is 2 inches, you have enough room. I went ahead and…

The 3000 lb capacity would mean that each ramp can handle a maximum of 1500 lbs applied to it or 3000 lbs for the pair. Since your tractor weighs 3500 lbs, I wouldn't use these ramps if the weight from both axles would be on the ramps at the same…

The chocks of the Erickson ATV E-Track Tie-Down Kit #EM98CV are designed to be driven over as they are bolted to the floor.