TrailerLegs Trailer Jack - Storage Jack - 326-TRLLG-2 Review Video

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

You can indeed test a trailer's electric drum brakes by directly applying +12V power from a fully-charged battery. You can apply this power to the hot and ground contacts on the trailer's plug (see photo please) or to an individual…

Lug Nut torque for the Aluminum Trailer Wheel #AM22654 will be between 90 and 100 foot lbs torque based on the 1/2 x 20 wheel studs and 15 inch aluminum wheels. Because the wheel bolt holes are reinforced with the improved clamp force technology, I…

The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn…

The grease that comes installed in the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased #AKHD-545-35-K that you referenced is a Lithium based grease. When it's time to re-grease them we…

You can absolutely add a 3rd braking axle to your trailer. You will simply want to match your current axle for dimensions and capacity. I've linked the page to your options we carry to assist. Then you will need to change your hanger…

Your Torsion axle simply has integrated suspension into the axle. It is no different than having a trailer with constant weight on it like a travel trailer to have your 1500 lb UTV stored on it. Your axle is rated at 3500 lbs so it won't be…

The TrailerLegs Tire Saver Stands #326-TRLLG-4 are perfectly safe for your axles and will not cause any damage whatsoever. Axles are designed to bear the weight of a trailer and using the TrailerLegs does not affect their capacity or ability to do…

Yes. The Replacement Cap with Strap for Valterra Gray Water Waste Valve - 1-1/2" FPT - Black #TSV6 has a 1-1/2" FPT fitting and the Valterra Fill Thread Adapter - 1-1/2" MPT #RF909 has a 1-1/2" MPT fitting, so they are…

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

My contact at Performance Tool said that the amount of amps that the 6" Oscillating Fan 12-Volt #PTW1658 draws is 1-1/2 to 2 amps. I have attached a review video that you can check out as well.

The TrailerLegs Tire Saver Stands #326-TRLLG-4 were tested and designed for the trailer to be stored in that 2nd position. I did reach out to my contact at TrailerLegs and he said that they haven't tested it out but you can try if you'd like.…