bing tracking image
  1. Trailer Jack
  2. TrailerLegs
  3. Boat Trailer
  4. Car Hauler
  5. Enclosed Trailer
  6. Fifth Wheel Trailer
  7. Utility Trailer
TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions - Single Axle - 8K - Qty 2

TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions - Single Axle - 8K - Qty 2

Item # 326-TRLLG-2
Retail:$189.95
Our Price: $179.95
You Save: $10.00
Trailer Jack
Shipping Weight: 23 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
These stands protect and prolong the life of your trailer tires by keeping them up off of the ground while your trailer is not in use. Place the durable stands on both sides of the axle, and use your vehicle to pull the trailer up onto the stands. Great Prices for the best trailer jack from TrailerLegs. TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions - Single Axle - 8K - Qty 2 part number 326-TRLLG-2 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (44)
  • Q & A (0)
  • Photos

TrailerLegs Trailer Jack - 326-TRLLG-2

  • Boat Trailer
  • Car Hauler
  • Enclosed Trailer
  • Fifth Wheel Trailer
  • Utility Trailer
  • Not Mounted
  • Storage Jacks
  • HDPE Plastic
  • TrailerLegs

These stands protect and prolong the life of your trailer tires by keeping them up off of the ground while your trailer is not in use. Place the durable stands on both sides of the axle, and use your vehicle to pull the trailer up onto the stands.


Features:

  • Tire saver stands protect and prolong the life of your trailer tires while the trailer is not in use - great for camping trips and storage situations
    • Defends against dry rot from tires resting on damaging surfaces
    • Eliminates flat spots from prolonged periods of tires bearing trailer weight
  • Stands lift trailer wheels off of the ground, using the axle to support the weight of the trailer
    • Solid platforms offer 8 times the stability of rubber tires, which can flex under the weight of your trailer
  • Simple, 5 minute setup
    • Place stands next to tires, on either side of trailer axle
    • Use tow vehicle to move trailer forward or backward until stands pivot upright to raise axles
  • Rubber gripping bars provide a stable base and ensure consistent activation of stands
  • HDPE construction ensures strength and durability
  • Made in the USA


Specs:

  • Application: single-axle trailers with leaf-spring suspensions
    • Great for campers, boat trailers, horse trailers, 5th-wheel trailers, and more
  • Quantity: 2 stands
  • Weight capacity: 8,000 lbs
    • 4,000 lbs per stand
  • Overall stand dimensions: 15" long x 8" wide x 19" tall
  • Minimum clearance required between ground and axle: 10-1/2"
  • Weight: 10 lbs each


TrailerLegs provide a quick and effective way to protect your tires while your trailer is in storage. By keeping the trailer's tires off of the ground, you can avoid unnecessary wear and tear that could lead to dangerous blowouts on the road and costly repairs.


Protects and Prolongs Life of Trailer Tires

It is easy to forget that while your trailer is in storage, its tires are still working. Even if you aren't towing, the tires continue to bear the weight of your trailer. This can lead to flat spots, which are areas on the tire where the rubber has become either too soft or too stiff compared with the rest of the tire. In addition, exposing the tires to any moisture that collects on the ground can cause the rubber to rot.


TrailerLegs keep your tires up off the ground while your trailer is in storage. This means that you won't return to flat or misshapen tires when you need to use your trailer next. Keeping your tires in great condition will greatly reduce your chances of having a blowout on the road and having to spend money on replacing the tire and repairing your trailer.


Fast and Easy Setup

Setting up your trailer for storage with TrailerLegs is a pain-free process that takes as little as 5 minutes. Make sure you have at least 10-1/2" of clearance between the ground and your vehicle 's axle. If you need additional clearance, use leveling blocks to provide extra lift.


Trailerleg Placement on Trailer Axle

Place the TrailerLegs beneath the axle, right next to the tire, on either side of your trailer. The legs must be angled so that the axle rests in the rounded cutout on top of the stands. If you intend to pull the trailer forward, place the legs in front of the axle. If you want to back the trailer into position, place the stands just behind the axle.


Trailerleg Placement on Trailer Axle Engaging

With the stands in position, use your tow vehicle to push or pull the trailer backwards or forwards to activate the stands. The rubber strips on the stands will provide grip as the legs pivot up, following the movement of the trailer.


Note: If you have a drop-axle trailer, you will need to position a 2" to 3" block in front of each tire so that the tires can ramp up enough to pivot the TrailerLegs.


Trailerleg Supporting Trailer Axle

You only need to move the trailer a little bit to get the legs into the upright position with the axle resting in their top-mounted, round cutouts. Once in this position, the TrailerLegs will support the weight of your trailer instead of its tires. This protects your tires and safely stabilizes the trailer until you're ready to hit the road again.



TLX-2 Trailer Legs Tire Saver Storage Stands - Single Axle Set - 8,000 lbs - Qty 2





Customer Satisfaction Score:


Customer Reviews

TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions - Single Axle - 8K - Qty 2 - 326-TRLLG-2

Average Customer Rating:  4.6 out of 5 stars   (44 Customer Reviews)

These stands protect and prolong the life of your trailer tires by keeping them up off of the ground while your trailer is not in use. Place the durable stands on both sides of the axle, and use your vehicle to pull the trailer up onto the stands.

by:

I bought two pair of these stands so I can get the tires of my tandem axle 5th wheel off the ground or pads during storage. I found that these were so easy to use that I now carry them in my pickup bed when hauling. I think they are safer and more stable than using a jack in case of tire changing. When I'm at a park that has level pads I will use these instead of wheel chocks. They don't work well on gravel or loose soil as they tend to slip and push. Not cheap but effective. I'm happy with them.



by:

I have some for my fifth wheel,
So I
thought it would be time to get some for my boat trailer.
I really like them,they make the tire life a lot longer.



by:

I have used these successfully on my dual axle travel trailer to replace all four tires at once, and adjust the electric brakes (which requires spinning each wheel freely to find a setting that provides slight resistance). Easy to setup and store. Best to have a spotter to help you know when you've pulled the trailer up on the stands and not go past the lift points.



by:

Purchased the trailer legs to store my 5th wheel Toy Hauler with the tires off the ground. Due to dual axles, I had to purchase 2 sets. Very expensive. They raise the tires on the ground about 1.5 inches. They work best on level ground. My RV pad has a slight 2 deg slope for rain runoff so my RV leans to one side. Sometimes I have to adjust the leg angle to the axle so that all 4 legs sit evenly on the ground when I pull forward. I tried to build up the low side of the pad with wood under the trailer legs so the RV would be stored level side to side. It did not work so great. I had to pull the RV wheels up on a 2"x8"x6' board and then build a custom height 1"x8"x5' board to put under the legs. I had to add non slip traction to the board for the legs so they would not slip. All is good now. Nice and level.



by:

Works great on concrete, not so great on gravel or hard packed dirt. In order to have it up on the jacks where I park it for the winter, I have to put some boards on the ground and it takes 3-4 tries to get the jacks to lift rather than slide. Once it's up, it's great. It makes bearing & brake maintenance a breeze and increases tire life.



by:

In-conclusive. The ground was too soft. The legs on one side dragged. The other side did go up. After we unhooked it dropped down but still it relieved some pressure on the tires. Lesson learned do this on stable ground/concrete/asphalt. The trailer is also 9,000 lbs so that did have some effect. I tried with the trailer assist and without, same result.



by:

I think the trailer legs are good but 3 inches to big for my trailer. I use some wood to raise the trailer to get the legs to position correctly on the axels.



by:

These worked just as described, simple and quick



by:



by:

First, the increased stability in the trailer over just the 4 jacks and the tires on the ground is amazing!
Second, getting these in place is not as easy as the directions or the videos suggest. Every time I would back up on to the legs at least one would not be on the ground correctly, either not back far enough or back to far because at least one would slide on the ground. I tried at least 6 times and always at least one would not be right. I finally used a bottle jack to lift the axles enough to set the legs that were not sitting right into the correct position.
Third, Once I got all four legs set correctly I leveled the trailer. The problem here was that to get the trailer level it actually moved up and off the legs. To fix this, I used the left side jacks to get the trailer up enough to slide boards under the legs and ran the auto leveling again. This time the left side was on the jacks but the right side was still off of them. I did not have anything to build up the right side (yet) so I am a full bubble low to the right so I have weight on the legs and not supporting trailer weight on the jacks. This most likely would not be a problem if you are just using the legs for trailer storage.
Overall a great product for saving your tires and stability while using your trailer. Just be aware set up could be more involved and some trial and error to get everything set correctly.



by:

Work great! Saving my tires for travel instead of flat spotting then causing a blowout. Highly recommend!



by:

Trailer legs work great. It keeps all 4 wheels off the ground. Makes it easy to change a tire and do regular maintenance on bearings and brakes. Easy to use.



by:

Excellent service and follow up email from Carol.



by:

Haven't used them yet but when I put my trailer up for winter I will!!!



by:

These TrailerLegs work great. They get the wheels off the ground very easily. Great way when storing trailers for a long period of time.



by:

Love these things so much, bought a set for my son-in-law’s 40’ Montana 5th wheel. We’ve both found it extremely time saving when rotating/changing tires, doing brake & wheel bearings or anything under the units. It’s wonderful to know we don’t have to worry about tire rot or unnecessary bearing pressure while in winter storage here in Washington! We found it much easier to pull the trailers “evenly” up on these things to use low range 4 wheel drive, if you have it. I always keep one in the truck in case of a flat. Worth every penny! This is what I use them on:



by:

Trailer legs work as advertised. I have heard that they don't work very well on grass. I have had no problems using them on grass. I am very happy with purchase. They are super sturdy and durable. It takes a little practice to use them, but it gets easier the more time you use them.



by:

Works as advertised!



by:

Don't like them waste of my money! Either my campers too heavy for a $37.06 camper that weighs 10,000 lb cuz it made my dually spin tires on asphalt and gravel so I don't know where these videos are coming from falsified information of what I think I want my money back!!



by:

These are the BEST investment I have ever made for my truck and cargo trailer. We had an insane snow and ice storm in Oregon this last year these were rock stars' and held our trailer through some intense weather. Absolutely would recommend as your FIRST choice and defiantly through etrailer. Super fast shipping and good pricing for sure! Thank you!



by:

It’s made of heavy duty plastics with the rubber boots, when using it to store your 5th wheel use a 2x4 to roll your wheel up on to help with the lifting of the trailer, I have a 5th wheel 41’ keystone Montana, I don’t feel it moving around or shaking when I walk around in the RV



by:

Just received Trailerlegs, so haven't used them yet, but have looked over them & they look very sturdy. Should be great for lifting wheels off the ground. Will definitely carry one or two when traveling for that inevitable flat tire. Should make life a whole lot easier. Will update review later.



by:

etrailer:

Installed your "Trailer
Legs" on my tandem boat trailer while in long term storage. Worked perfectly!......What a great product! Very easy to set up.

Thank you



by:

Super easy to use even the first time. I have a 39’ dual axle 5th wheel and it lifted right up onto the trailer legs just as advertised. Love them!



by:

So far great. Got them yesterday and pull the trailer up on them by myself without any real problems. Hoping to save the tires while the trailer isn't being used


25
44
Show More Reviews

See what our Experts say about this TrailerLegs Trailer Jack

  • Can Trailer be Used at Same Time as TrailerLegs Tire Saver Stands
    The TrailerLegs Tire Saver Stands # 326-TRLLG-2 can be used when camping and using your trailer, yes.
    view full answer...
  • How To Determine If the TrailerLegs Tire Saver Stands Can Provide Enough Lift
    The TrailerLegs Tire Saver Stands part # 326-TRLLG-2 can lift the trailer axle up to 15.25”. This would be the distance from the ground to the bottom of the axle so as long as the tires are off the ground at 15.25" then this will work for you.
    view full answer...
  • Can Blaylock EZ Jack be Used to Change Tire on 2017 Coachmen Freedom Express 246RKS
    If the Trailer Aid Plus system didn't quite get a bad tire off of the ground for your 2017 Coachmen Freedom Express 246RKS then the Blaylock EZ Jack and Wheel Chock # EZ-JACK will probably not work since it offers about the same amount of lift and your axles are spaced further apart. Instead I recommend using the TrailerLegs Tire Saver Stands because they are designed to lift your trailer by the axle. These come in a set of 2 # 326-TRLLG-2 as well as 4 # 326-TRLLG-4 depending on how you...
    view full answer...
  • Could TrailerLegs Tire Saver Stands # 326-TRLLG-2 be Used to Lift Trailer that Weighs 14.5k
    Each of the TrailerLegs Tire Saver Stands # 326-TRLLG-2 are rated for 4,000 lbs. So if you used 4 of these you'd have enough capacity on your tandem axle trailer as you'd have a capacity of 16,000 lbs and a trailer weight of 14,500 lbs.
    view full answer...
  • How To Protect Trailer Tires During Winter Storage
    To protect the tires from flat spots and damage the best practice is to raise the tires off the ground during winter storage. I recommend TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions part # 326-TRLLG-2 for a single axle or part # 326-TRLLG-4 for a tandem axle. These stands do a great job at keeping the tires off the ground to avoid flat spots and dry rot. I still recommend to still use covers on the tires depending on what size wheels you have to protect the tires...
    view full answer...
  • How To Avoid Flat Spots In Tires During Winter Storage
    The best way to avoid flat spots in your tires during winter storage is raise the trailer off the ground during storage. I recommend to use the TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions part # 326-TRLLG-2 to raise the trailer off the ground. They use the axle to support the weight of the trailer.
    view full answer...
  • TrailerLegs Tire Saver Stands for Lighter Tandem Axle Trailer
    The combined 8,000 pound weight capacity for the Single Axle TrailerLegs Tire Saver Stands # 326-TRLLG-2 is enough to support the weight of your trailer but you will still want a set on each axle to provide proper lift on all 4 tires. Using just one set may keep the other axle low enough that those tires aren't off the ground. We do have a tandem axle set with part # 326-TRLLG-4 that includes 4 stands. I have attached a short video review that you can check out as well.
    view full answer...
  • Is it Important to Get Trailer Tires Off Ground if Trailer will be Stored Long Term
    It's going to be a good idea to get the weight off of your tires when it's stored long term. If the tires sit in the same spot for an extended period of time they tend to get flat spots which makes for a rough ride and wears them out prematurely. So the easy solution is the TrailerLegs Tire Saver Stands # 326-TRLLG-2 for a single axle trailer or # 326-TRLLG-4 for a tandem. This is a really easy way to get the tires off the ground so they'll last as long as possible. Basically you put these...
    view full answer...
    Image 1 for
  • Are Trailer Legs Safe for Trailer Axles
    The TrailerLegs Tire Saver Stands # 326-TRLLG-4 are perfectly safe for your axles and will not cause any damage whatsoever. Axles are designed to bear the weight of a trailer and using the TrailerLegs does not affect their capacity or ability to do so. The TrailerLegs # 326-TRLLG-4 are designed to be used on tandem axle trailers and have a 16,000 lb capacity (4 stands each with a 4,000 lb capacity). They are also available for single axle trailers with an 8,000 lb capacity at part #...
    view full answer...
    Image 1 for
  • Benefits of Switching to Trailer Tires with Higher Load Range and Speed Ratings
    Excellent question. There is no disadvantage to using a special trailer tire with a higher weight Load Range Rating than is required by your trailer's weight. Doing so simply means that those higher-rated tires will tend to run cooler, since they will be operated below maximum capacity, and this is always a good thing with any tire. Heat is the worst enemy of a tire and the two conditions that typically lead to excess heat build-up are overloading beyond rated weight capacity and operating...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Jack?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Brian T
Written by:
Brian T
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.