Lug Nut Torque for Aluminum Trailer Wheels

Question

Question:

What is the recommended torque setting for the lug nuts on this wheel assuming 1/2-20 bolts?

asked by: Dave E

0

Expert Reply:

Lug Nut torque for the Aluminum Trailer Wheel # AM22654 will be between 90 and 100 foot lbs torque based on the 1/2 x 20 wheel studs and 15 inch aluminum wheels. Because the wheel bolt holes are reinforced with the improved clamp force technology, I would torque them to 100 foot lbs and they will not need to be re-torqued regularly like other aluminum wheels due to that technology.

I've attached a torque specification chart based on stud size, wheel size/type, and wheel material.

expert reply by: Jason S

0

click to enlarge

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Wheel torque specs vary based on stud diameter, wheel diameter and wheel material. The linked chart shows you commonly recommended torque specs for a range of studs and wheels. For 1/2-inch wheel studs and a 14-inch steel trailer wheel you will use…

view full answer...

Answer 3

The nut on the spindle should be tightened until snug, with no side-to-side play in the hub and then backed off slightly, about maybe a 1/8 of a turn. If the spindle uses a castle nut and cotter pin or tang nut, tighten the nut finger tight until…

view full answer...

Answer 4

The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part #AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self…

view full answer...

Answer 5

Some of the Dexter hub/drum assemblies are rated for 5200 lb axles and some are rated for 5200 to 7000 lb axles. The only difference is bolt pattern. There are 6 on 5-1/2 assemblies that will only be compatible with 5200 lbs where the 8 on 6-1/2…

view full answer...

Answer 6

If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer wiring combines those signals on one circuit. If I'm wrong let…

view full answer...

Answer 7

The Americana Aluminum 7-Star Spoke Trailer Wheel you referenced, #AM22654 as well as the rest of the 15 x 6, 6 lug alloy wheels we offer all have a 2830 lb weight capacity. This would be more than enough capacity for your 10000 lb capacity…

view full answer...

Answer 8

You will want to use a dial caliper or micrometer to measure the inner diameter of the hub you have on your trailer to determine what size cap would be needed. Check out the picture I attached that shows this measurement being taken on a hub. I…

view full answer...

Answer 9

In order to determine the correct size grease cap, the best thing to do would be to take apart one of the hubs and get the outer bearing and race numbers. You can also get the hub bore inner diameter using dial calipers for the most accurate…

view full answer...

Answer 10

There are a number of reasons why the brakes on your trailer may not be working. Lets start with the easiest things to check. First, check the vehicle and trailer connectors for corrosion. This can cause a short inside the connector and the brake…

view full answer...

Answer 11

The only time that a metal valve stem like part #AM20906 is required is when the psi rating meets or exceeds 100 psi. If you plan on using the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel #AM3H490 then you don't have…

view full answer...

Answer 12

This is a debate that's been raging (well, maybe simmering) for years. In most cases, because trailers do not have steer or drive axles it's not as crucial to balance them as it is for passenger vehicles. In my opinion, it's…

view full answer...

Lug Nut Torque for Aluminum Trailer Wheels

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching