Review of TowSmart Trailer Hitch Ball Mount - Fixed Ball Mount - TS78FR Video

For your 205/65-10 tire that has an outer diameter of 20.5 inches, I recommend the Adco Spare Tire Cover - 21-1/2" Diameter #290-1740. This will give you a slightly larger diameter to assist with the tire being wider. This is the best fit we…

The standard plate to put the VIN sticker of the Malone Microsport Lowbed Trailer Model #MPG460G is on the frame of the trailer. Since the tongue of this trailer is removable I put it further back than that on the portion of the frame that splits off…

To tow a smaller trailer with the 2015 Honda Odyssey you will need a hitch, lock, ball mount, ball and wiring. If the trailer has electric brakes, you will also need a 7-Way plug on the vehicle and a brake controller. I recommend to use the Draw-Tite…

The overall diameter of your tire size 205/65-10 is 20.5 inches which we have spare covers in the colors black and white. For black you'd want the part #CE27410 or for white #052963751000. The prices for the covers are available at the product…

Yes, we do have tire covers for 205/65-10 tires. I recommend the Classic Accessories RV Wheel Covers part #CA80098 which are gray in color.

At the time the video was made, Kenda hadn't done speed rating testing on the tire, over and above the default figure of 65 mph. Since that time, Kenda has done additional testing and have found that the tire meets the criteria for an M (81mph)…

The wheel and tire combinations we offer like the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 4 on 4 - LR D #AM35351DX you were looking at come with the heavy spot of the tire matched to the light spot of the wheel,…

In regards to upgrading, which for most means going with a larger wheel/tire combo, this is possible but you will be limited by the bolt pattern of the hubs. The 4 on 4" bolt pattern will allow for wheel sizes from 8-13". The best size…

This is a great question! Although we do list the ball hole diameter in the specs for each ball mount, there is an easier way to make sure a ball mount has the hole size you need. Any ball mount rated for Class IV hitches will have a 1-1/4" ball…

The Draw-Tite Ball Mount for 2" Hitches #2753 will work just fine for your situation. I wouldn't be to overly concerned over a 1/4" difference in the height measurement. I usually suggest to be plus or minus 1" for the height. This…

According to Toyota the 2003 Toyota Camry automatic is not designed to be flat towed behind a motor home with all 4 wheels on the ground to avoid damage to the vehicle's transmission. The only way to flat tow the Toyota Camry automatic is with a…

The distance from the center of the hitch pin hole to the gusset welded onto the Curt #C45311 is 4 inches, as shown in the provided photo. If you're wanting something with a longer shank for additional clearance, I'd recommend the Curt…