Tow up to 2K with the 1-7/8" ball, 5K with the 2" ball or 10K with the 2-5/16" ball on this 7-3/4" long ball mount. Also acts as a clevis hitch or a pintle hook for attaching a lunette ring. Polyurethane interior absorbs shock.
Features:
Specs:
Convert-A-Ball ball mounts are designed with a polyurethane interior that helps to absorb road shock to limit bouncing and vibration while you tow over rough terrain. It also reduces the slamming and banging that occurs during stops and starts. This helps to protect your vehicle's driveline, your hitch assembly, and your trailer's contents while you're towing.
This Convert-A-Ball ball mount meets or exceeds THMAV-5 ratings in all categories and meets SAE standard J-684.
Average Customer Rating: 4.9 out of 5 stars (1225 Customer Reviews)
Tow up to 2K with the 1-7/8" ball, 5K with the 2" ball or 10K with the 2-5/16" ball on this 7-3/4" long ball mount. Also acts as a clevis hitch or a pintle hook for attaching a lunette ring. Polyurethane interior absorbs shock.No problems with the hitch- makes it easy to switch between trailers! I have no complaints!
Works as described. Perfect for light truck use.
Very good product and I would have given it a 5 star rating but there is one critical flaw that is quickly remedied. When using the pintle hitch, the pressure exerted on pin while pulling a load can cause the pin to turn, thereby popping out the keeper pin. This happened twice and it was a good thing that I had the hitch positioned so that the pintle pin was installed going down allowing gravity to hold the pin in place even when the keeper pin fell out. I have since changed out this style of keeper pin with a cinch pin that can spin 360 degrees inside the 2" tube and no pressure is exerted on it by the load being pulled. If I were designing this from new, I would make it so that the draw pin on the pintle had a square shoulder much like a carriage bolt so that it can't turn thereby eliminating pressure on the keeper pin. Other than that it is a great product.
The cotter pin was bent. It didn’t seem to be fitting good so I tried to straighten it which broke the tip off, rendering it useless. Looking back at the pictures on your website for the product it is apparently supposed to be bent to help it fit better in the confined space. Oh well, live and learn...
I have a Toyota Tundra w/tow package 2in receiver. This product fit great right out of the box. Construction is heavy and precise. The cushion works great, currently I can see approximately a 1/4" slide with what I'm towing around town. It really eliminates that rough start and stop in metal/metal hitches. If your towing all the time, and need a multiple ball/pintle set up this product is well worth the money just be sure to measure your trailer/ball height as this unit has no drop.
Ball hitch is rugged. I'll be passing this onto my kids and their kids. I use the setup with my tractor, with a logging hitch, with chains to drag,/pull items, etc. and to move trailers around the property. The clevis hitch is nice to have as well.
Beware shank lengthI ordered this ball mount to use with a Hidden Hitch receiver on my Toyota Tundra. In my case the shank length is too short to allow use without an extension. The balls or pintle hits the bumper before the retaining pin can be inserted. Otherwise it is a nice piece of equipment.
I am a believer in the 6 way cushioned hitch and its the only hitch that is on my company trucks, which is why I now own five of them. Great service from etrailer and prompt shipping! Thank you
Box was a little banged up upon delivery but the massive amount of bubble wrap kept everything perfect. Too bad its not going to stay that way once I hook it to my tractor receiver. Fast shipping too for regular rate.
rugged well made, only suggestion is include the receiver hitch pin.
I am exceptionaly pleased with the product as well as the customer service. Will definately order again from ETrailer.com. Kudos for the fast shipment as well!
Total package with versatility. Now wether I am picking up or dropping off or helping a friend drag a stump out of the way, I have the one tool I will need and definitely use.
nice. very good. will be handy and nicer than changing hitches all the time
I couldn't be more delighted with the hitch. It is Made in the USA, which is exceedingly important. This product was ordered over the phone with an informed, helpful, live person, on a SATURDAY!
And it was in my possession within 4 days.
Impressive!
Excellant fit and finish, the clevis pin works very well.
Total piece of crap ..does not do what it claims… the cushion only has 3/8 of an inch latitude
Ordering was easy, selection was excellent. Shipping was fast. Quality/construction looks good however have no idea as to the quality of the product yet as it's not been used in the field. Might want to recontact me in a couple of months.
I gave the last one to one of my employees and I bought another one because I liked it so much.
Great all around hitch.
Solid product, build very well. Fast shipping. I like this company
Just went and bought our 3rd one of these, very handy and well made.
Just what I wanted. Absorbs shock from heavy loads.
AS EXPECTED A+++
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.