Roadmaster Skid Wheels - Hitch Mount - RM-050 Review Video

The Roadmaster Rollaway Trailer Hitch Protector #RM-050 will likely work with your trailer hitch that has the tabs on the bottom of the receiver as there does not look like there is going to be any interference. So long as the tabs are completely…

We do not have the CAD drawings or blueprints for the Ultra-Fab Steel Roller, part #UF48-979020, but I have attached a photo of the roller with dimensions shown. The mounting bracket measures 1-1/4 inches from the center of the hitch pin hole to…

I do have an option for you but the Curt Trailer Hitch Receiver part #13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This…

Yes, the Rollaway Hitch Protector, #RM-050, should be plenty heavy enough to work on your 37 foot motorhome and keep the hitch from dragging when you back into your driveway, as long as the dip you have is not so deep that it is bending the hitch…

Yes, the Curt Trailer Hitch Receiver #C67ER will fit your 2024 Kia Carnival as well!

The bolts that come with the Curt hitch #C67ER are M12-1.25 which based on seeing your picture I would recommend using this size tap to clean out your threads and you'll be good.

It is not a requirement to balance trailer tires like you do for your vehicle tires. The reason for this is because the trailer tires have a tendency to "throw weights". This means that the weights come off the wheels. This can happen for a…

Trailer tires and wheels do not typically come balanced from the factory like what you see with standard passenger vehicle tires. This isn't usually needed for trailer tires and most car shops don't have the needed setup to properly balance…

Since Demco uses their own proprietary fittings and the replacement hose #SM99666 is only 7' in length you'd have to build your own air hose using the female #SM99613 and male #SM99614 connectors and air tube from your local hardware store to…

Personally I feel the etrailer Trailer Hitch Receiver #e36KR will be the least visible receiver for your 2023 Kia Carnival. The design of this is similar to the Curt #C67ER but uses a matte black finish allowing it to blend in better with the factory…

To add a 2" hitch to your 2023 Kia Carnival, I recommend the etrailer Hitch item #e36KR. This hitch is custom fit and bolts directly to your Kia with included hardware. The etrailer Hitch item #e36KR is a class III hitch, with a 2"…

Yes, the Ultra-Fab Hitch Mounted Steel Rollers #UF48-979018 do have a grease fitting on the end of the bolt that secures the roller to the rest of the assembly. Please refer to the photo I linked that shows the grease zerk fitting which allows for…