Review of Stromberg Carlson RV and Camper Steps - Single Manual Step - SMFP-1100 Video

To safely secure your 2018 Mustang Saleen and GT500 I recommend using the Erickson E-Track Wheel Tie-Down Strap #EM58523. This ratcheting tire strap is a perfect solution for your application since it will only touch the tread on the tire and the…

The mounting bracket of the #AS04 is 25 inches wide. The step width is 18 inches.

We sure do! You'll need switch #37213435 which works with the #37213625 Triple Bezel Face Plate you'd referenced. JR Products confirmed the compatibility for me.

I recommend placing 2 of the Single Rocker Switch #37212635 at both the front and rear door with the Double Bezel RV Switch Faceplate #37213615 at each location. This way you will be able to control both lights from either location. Each switch is…

I have a solution for you that is very similar but the switches of the JR Triple Switch setup part #37212025 are not removable. Instead you'd want the Triple Bezel RV Switch Faceplate #37213625 and the part #37212585 for the SPST switches and the…

The mounting bracket portion of the Pull Out Steps part #SMFP-1100 that you referenced is 6 inches long with a distance of 4-1/2 inches between mounting holes. From outside to outside of each bracket it measures 25 inches. From bolt hole center to…

I have a solution to help you install your Lippert Manual Double Step #LC432682. While your gusset plate idea would work, if you are concerned with stability I recommend using the Lippert Outriggers #LC301704 to help you mount the steps to your…

You will need a Trailer Wiring 7-Way Upgrade Kit w/ Junction Box #HS381-9000 if you do not already have a 7-way on the front of your Trailer. This will then tie into a Bright Way Push-to-Test Trailer Breakaway Kit #3802308 before going to the brakes…

I don't have any way of looking up what specific locks were used on your Forest River 16BHS, but I can say that Global Link provides most of the entry door lock sets for later model RV/Campers. The lockset fits doors that are 1-1/4" to…

If the ball is smaller than what the coupler requires then the coupler would be able to move around quite a bit and wear down the ball. If the ball is the right size then excessive tongue weight could be a factor. The trailer tongue weight is…

If 380 pounds is the tongue weight of your trailer, then you are correct. You add the tongue weight of the trailer to bike rack and bikes, and that total is your total tongue weight. Make sure you are within the tongue weight capacities of both your…