Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 26 Series - 23-1/2" Wide
(53 reviews)
Price: $500.42
In Stock
Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 26 Series - 23-1/2" Wide
Item # LC3711361
Retail:$692.95
Our Price: $500.42
You Save: $192.53
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (53)
- Q & A (0)
- Photos
Kwikee RV and Camper Steps - LC3711361
- Motorhome
- Electric Step
- 1 Step
- 24 Inch Wide Step
- Kwikee
- 24-3/8 Inch Wide
- Steel
- 5 Inch Drop/Rise
- No Ground Contact
Replaces the electric step, motor, and switch kit for your Kwikee 26 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.
Features:
- Replaces the step, motor, and switch kit for your Kwikee 26 series steps
- Control unit (LC379146) for automatic extension sold separately
- Motor works with gearbox to extend and retract the step
- Switch kit wires to the step and mounts inside your RV for manual operation
- Integrated safety feature automatically retracts the step if it strikes an obstacle during extension
- Non-slip tread and easy-to-see reflective strips on step surface
- Sturdy, powder coated steel construction with weatherproof wiring withstands the elements
- Solid steel drive rods and stainless steel bushings provide additional durability
- Air pressed rivets at pivot points ensure long-term strength
- Simple installation with existing mounting holes and wiring harness
- Hardware sold separately
- Made in the USA
Specs:
- Extended height: 7"
- Folded height: 7"
- Overall width: 25-1/4"
- Mounting plate dimensions: 24-1/4" wide x 10" deep
- Bolt pattern: 20-1/2" wide x 7-1/2" deep
- Step dimensions: 23-1/2" wide x 9-7/8" deep
- Drop/Rise: 5"
- Voltage:
- Motor: 12V
- Switch kit: 250V
- Weight capacity: 300 lbs
- 1-Year warranty
Note: This step assembly includes the steps, motor, and switch kit only. The steps will operate manually through the switch kit.
If you want the complete step assembly that allows the steps to automatically extend and retract with the RV door, you will need a control unit. The switch kit included with this assembly will still work, but if you want to be able to override the automatic retraction, so the steps stay out whether the door is open or closed, you will need a different switch kit. The complete assembly with steps, motor, control unit, and switch kit is available under part number LC3711363 .
The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should have this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.
Safety Features
The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicle's ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.
Will Kwikee Electric Steps Work for You?
Electric steps are typically installed on RVs and some travel trailers. The electric steps from Kwikee install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Kwikee electric steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space is at least 25-1/4" wide and 10" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 24-3/4" wide to 37-1/4" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 8" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays mounting bracket widths in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Mounting Bracket Width | Entry Height | Part Number (Complete Assembly) | Part Number (Replacement Assembly) |
|---|---|---|---|
| 24-3/4" | 15-5/8" - 17-5/8" | LC3747453 | LC3747452*, LC3747451** |
| 25" | 16-3/4" - 18-3/4" | LC3724742 | n/a |
| 25-1/2" | 27-7/8" - 29-7/8" | LC3658373 | LC369552*, LC365837* |
| 25-1/2" | 20-1/8" - 22-1/8" | LC372261 | LC3722615*, LC3722617**, LC3722616*** |
| 25-1/2" | 20-1/2" - 22-1/2" | n/a | LC3725791* |
| 25-1/2" | 12-1/8" - 14-1/8" | LC3723383 | LC372338** |
| 25-1/4" | 13" - 15" | LC3711363 | LC371136*, LC3711361 ** |
| 25-3/4" | 22-7/8" - 24-7/8" | n/a | LC372558* |
| 25-5/8" | 11-7/8" - 13-7/8" | LC3691461 | LC369146*, LC3691462** |
| 25-5/8" | 13" - 15" | n/a | LC3726041* |
| 25-7/8" | 23-1/4" - 25-1/4" | LC3726892 | LC3726891** |
| 26-5/16" | 27-1/4" - 29-1/4" | LC3694042 | n/a |
| 29-3/8" | 18" - 20" | LC3722661 | LC372266*, LC3722662** |
| 30-1/4" | 15-1/4" - 17-1/4" | n/a | LC372779* |
| 30-3/8" | 17-1/4" - 19-1/4" | n/a | LC427247* |
| 30-5/8" | 20-1/2" - 22-1/2" | n/a | LC375632* |
| 31-1/2" | 28-5/8" - 30-5/8" | n/a | LC375821* |
| 31-1/2" | 12-3/8" - 14-3/8" | LC3756271 | LC3756272** |
| 32-3/8" | 20-1/4" - 22-1/4" | LC3722862 | LC3722863** |
| 37-1/4" | 18" - 20" | n/a | LC3694112*, LC369411*** |
*Motor and control unit
**Motor and switch kit
***Motor only
How Do You Install the Steps?
To install the steps:
- Hook up the steps to power to verify that all components are in working order
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with carriage bots and flange lock nuts
-Make sure bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware tight
- Connect the appropriate writing to your vehicle's source
3711361 Lippert Components (LCI) Quickie 26 Series Motorized Motorhome Entry Step - One Stair - 5" Drop/Rise - 23-1/2" Wide - 300 lbs
Kwikee Part Number 902600906
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 26 Series - 23-1/2" Wide - LC3711361
Average Customer Rating: 4.8 out of 5 stars (53 Customer Reviews)
Replaces the electric step, motor, and switch kit for your Kwikee 26 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.by: Brian 04/17/2024
Had to replace my old ones after smacking a curb going through a driveway. These came fast and were a quick replacement. Thanks etrailer.
by: Fahed07/10/2023
I recieved a bare bone unit i know its not suppose to come with the controller but it is suppose to come with a motor! All it came with is the frame and switch kit
by: Karen 10/06/2023
Replacement step is like new
by: Rick01/08/2020
This step is used in a very unconventional way.
This application may not be what you are looking for in promoting the product.
This is replacing the identical step on my 4Runner.My wife has mobility issues and can not raise her foot to the height of the factory running boards.
Installing your step allowed me to retain my 2016, 4Runner.
Received the step this afternoon and is installed and working well tonight.
by: Dave 12/27/2019
Great Step! Bolt pattern fit exactly with the one I was replacing so it took some no time to get everything bolted up. Electrical connection worked great and step operated as expected.
Dave
12/29/2020
No issues solid product.
by: Ron09/18/2022
Was an exact replacement. No problems. Etrailer is the place for your RV needs.
by: Jimmie 03/24/2021
Product arrived promptly!! Will highly recommend this business to fellow RV'ers.
Very pleased with the replacement steps that I ordered.
by: Michael06/01/2018
Best price on the internet. I was initially concerned delivery would not be as quick as it would if I payed more at another online retailer, but WOW, was I wrong. Got it in 2 days! etrailer is my "go to" from now on.
by: Michelle 07/15/2020
Just received this step yesterday, just what we needed for our RV.
Shipping was fast, just a few days.
This is the second item we have ordered from etrailer, very happy with the service.
by: John S09/19/2020
The part arrived and fit perfectly. The shipping was fantastic as was teh true customer support. This team believes in true customer service!
by: Sandra11/05/2021
The step was good. However we damaged it again because it was so low. So we had it removed and will not replace.
Sierra K.
11/5/2021
It is good to measure where this step will sit from the ground before purchasing because it adds an additional 7 inches to your vehicle or RV.
by: David09/14/2022
Delivered on time at a great price after the first delivery came damaged. Customer service was very helpful.
by: Brian 08/29/2022
Easy to install
by: Robert11/03/2018
Perfect fit. After 1 year works just like new. Very satisfied.
by: Joe 08/18/2022
Awesome service! Thanks Stacey A for always taking care of our needs
by: Jaroslam07/16/2021
Received will open Monday thanks
by: Carmen 09/19/2022
by: Emanuel 11/22/2021
by: Robert 01/25/2023
by: Norris11/03/2022
by: Brian 05/03/2023
by: Drew02/21/2023
My experience regarding this purchase has been very good. We recently purchased a used RV and found that the previous owner had cannibalized the motor and control unit from the existing step; what remained was rusted and unusable. I removed old step, cleaned up the remaining rust and painted the area where the new step would go. When I received the complete replacement assembly I could tell immediately that it was well engineered and made with quality materials. Installation was straightforward, included everything required and I was provided with information on how to get help if I needed it.
I would definitely encourage anyone in need of quality parts for their RV to give etrailer a serious look. I will continue to be a customer.
by: Tim 12/29/2023
This was a replacement for the original Kailee electric step that seized up. Install was straight forward but the mounting hole pattern was slighty different than the original. Installed replacement works as well as original
by: Tom 10/03/2023
About a year ago we had to replace our Kwikee Electric motorhome steps. Thanks to the people at etrailer we were able to get the correct steps and in a reasonable amount of time.
Thank you etrailer.
by: Tim10/13/2023
My old steps had been curbed twice and were beyond repair and eventually stopped working. I got to talk with Rob at e-trailer. He professionally listened to my questions and advised me on the correct set of Lippert Kwikee steps.
My order arrived one day earlier than promised. They were packed properly so there was not any damage during the shipping process. I did the installation myself as it didnt look to difficult. From start to finish it took about two hours to complete the installation and make electrical connections. It would have gone quicker but I had to “massage” the bolts that were slightly curb bent with a wood block and rubber mallet.
It was refreshing to deal with a company that has knowledgeable service reps and who seemed willing to make the ordering process as painless as possible!
E-trailer is my new “go-to” store in the future!
Thanks Rob…. Your the best!
25
53
Show More Reviews
See what our Experts say about this Kwikee RV and Camper Steps
- How To Determine Which Electric RV Steps Will Fit?In order to determine if the Replacement Step, Motor, and Switch # LC3711361 is right for your truck, you'll need to locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space is at least 25-1/4" wide and 10" deep. If it turns out you have more or less space beneath the doorway, you'll need to refer to the attached chart for your correct size. Finally, you'll need to measure the entry height by...
view full answer...
- Replacement Step, Motor, and Switch for Kwikee RV Electric Steps on 2020 Jayco Class C If your 2020 Jayco Class C currently has the Kwikee 26 Series, 23-1/2" wide steps installed, the Replacement Step, Motor, and Switch for Kwikee RV Electric Steps, # LC3711361 is a direct replacement. This is the same model and build used by the OEM's.
view full answer... - Is Frame of Kwikee 26 Series Available by ItselfI checked directly with Lippert (see cut out below), and the frame by itself is not something they have available as a replacement for the 26 Series steps. That said, if your control unit is fine, there is an option to get the steps without that, which will save you some money over completely replacing the whole unit. So what you can get is the following: - Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 26 Series # LC3711361
view full answer...
- Kwikee Step Solution for 1995 Jayco Designer Series Model 2930LB to Replace Missing SetThe closest Kwikee single step mounting dimensions we have is the part # LC3711361 which has the mounting holes separated from left to right at 20-1/2 inches like you have and front to back 7-1/2 inches. Looking at the bottom of the mounting plate on this step you could easily drill new holes to match the size you need.
view full answer... - Replacement Parts for Kwikee Series 26 StepsWe have several replacement parts for the Kwikee 26 Series steps depending on what you need. We have some different switch kits, # LC371010 and # LC369311, so if you believe the switch is the problem select the one that matches what you have. We also have Link Assembly C and 9510CU # LC379801 which is pretty much all of the electrical and mechanical components that operate the steps.
view full answer... - Is Just The Step Available For Replacement On A Kwikee 26 Series RV Step? The step itself for the Replacement Step, Motor, and Switch for Kwikee RV Electric Steps # LC3711361 is not available separately, unfortunately. To replace the steps you're going to need to buy the entire assembly again with # LC3711361. I know it's not ideal however since Lippert does not offer that as a replaceable part, this is going to be your only option.
view full answer... - Recommended Kwikee Step for Ford E-350 VanThere are not steps specifically made for Ford E-350 Vans, however there are many of the class III motorhomes that use the Kwikee steps as they are built out. To add steps to your E-350 van, I recommend the Lippert Components Kwikee 26 Series Single Electric Step # LC3711361. According to my contact at Lippert the upper panel can have other mounting holes added if needed to fit your frame. This kit includes the switch kit and motor. I've attached a video to assist.
view full answer... - What Comes with the Lippert Kwikee 26 Series Electric Step # LC3711361The only things included with the Lippert Kwikee 26 Series Electric Step # LC3711361 are the step, the motor, the switch, and the adapter harness. This is the most bare kit that we carry as the other 26 series steps come with the control module as well. It actually wouldn't be a bad thing to have an extra switch and adapter harness in case something were to need replacing anyways.
view full answer... - Comparing the Kwikee Single Step 26 Series vs. 28 SeriesWithout knowing the width of your step, all I can do is give you some options to compare. We have the Lippert Components Kwikee Step Frame 28 SERIES SINGLE STEP # LC3747457 which has a mounting bolt pattern of 6.5 inches x 22 inches and a step tread of 23.75 inches by 10 inches. It has a 7 inch vertical rise. The 26 Series step # LC3711361 has a mounting bolt pattern of 7.5 inches by 20.5 inches. It has a tread that is 23.5 inches by 8.5 inches. It has a 5 inch vertical rise.
view full answer... - Replacement Kwikee Step Series 26 Motor and Gearbox for 1995 Flair RVWe have the Lippert Components Kwikee Step Gear/Linkage with C for 26 Series Kwikee Steps # LC379162. Then you will need the motor # LC379608. We also have the complete repair kit for your Kwikee Series 26 steps if you prefer updating the components all at once. The Lippert Components Kwikee Step Replacement Kit Link Assembly C and 9510CU # LC379801 contains an integrated motor, gear box, linkage kit C, and control unit. Basically the repair kit replaces everything except the frame.
view full answer... - Replacement Gear and Parts for Original Lippert 3 Step on 2008 Forest River Georgetown 373For the replacement gear you will use the Replacement Entry Step Gear for Lippert Kwikee 25 and 26 Series Triple Steps # LC369354. I believe the shear pin you are referring to is a part of the gear itself. The motor is # LC369506 which comes with the smaller gear. If you want to replace the entire assembly you can use the Lippert Components Kwikee Step Replacement Kit # LC379804.
view full answer... - Replacement Series 26 Kwikee Electric Single StepI do have an option for you but I contacted Kwikee because the motor, gears and linkage are different for each series of steps, it is not possible to replace the series 26 step frame with the series 28 frame part # LC3747457. They do not offer just the frame for this series. I recommend to replace the whole step with part # LC3711361. I have attached a diagram of the bolting hole pattern for your reference.
view full answer... - Replacement Frame for Kwikee 26 StepsI checked with Lippert and the Kwikee 26 Series step does not have an available frame replacement for it, so you will need to replace the entire step assembly. For a new Kwikee 26 Series Step you'll want to use the # LC3711361, which fits on coaches with a 20-1/2" x 7-1/2" bolt pattern and is an electric step with 1 riser that does not contact the ground. I've linked a review video of this part for you to have a look at, as well.
view full answer... - IS The Kwikee 3711363 A Good Replacement For A Kwikee 3711161I wasn't able to find a 3711161 but I was able to find the Kwikee # LC3711361, which is a 26 series RV step. If this is what you have then any other 26 series step would have the same mounting dimensions (20-1/2" wide x 7-1/2" deep) and overall width (25-1/4") so you'd be able to use the Kwikee Electric RV Step Complete Assembly # LC3711363 as a replacement. That being said, both of these are the same step, but with different equipment included with them. The # LC3711363 is the complete...
view full answer... - Single RV Step Recommendation for RV with 5 inch DropI went through all of our RV single steps and none of the bolt pattern you are looking for but we do have the part # LC3711361 which has the 5 inch drop you need. It has a bolt pattern of 20-1/2 inch by 7-1/2 inch.
view full answer... - Can the Kwikee 26 Series Electric RV 1-Step Be Obtained Without the MotorThe Kwikee 26 Series Electric RV 1-Step is offered with the motor, control unit, and switch as part # LC3711363; the motor and control unit as part # LC371136, and motor and switch as part # LC3711361 but these are the only configurations available.
view full answer... - Does Kwikee 26 Series Step # LC3711361 Automatically Retract when Ignition is Turned OnThe Kwikee 26 Series step # LC3711361 retracts when the door is closed but if you have the door open and turn the key on it will not retract. The extend and retract function is controlled by sensors on the door.
view full answer...
Do you have a question about this RV and Camper Step?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Hannah L
Updated by:
Halie H
Updated by:
Cody B
Updated by:
Manda E
Video Edited:
Dustin K
Written by:
Chelsea B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
7/13/2023
Wow, I am so sorry to hear that! You are definitely going to need that motor. I will have our customer service team reach out to you about this right away. Thanks for letting us know!