Roadmaster Hitch Pins and Clips - Standard Hitch Pin - RM-910034 Review Video

I do have a possible solution for you but the most well equipped 2018 Jeep Wrangler JL Unlimited has a maximum tongue weight capacity of 350 lbs therefore, the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT78MR will not increase your tongue…

The Equal-i-zer Shank part #EQ90-02-4900 would be your best option to give you the amount of drop you need to tow your trailer level. The Curt shank you have now part #C17131 can do up to 2 inches of drop but the Equal-i-zer can do up to 6 inches so…

I went out into our warehouse to measure the thickness of the Demco 6-Hole Adjustable Channel Bracket #DM59602 that you referenced and found it to be .36 of an inch thick. The distance from the back of the bracket to the center of the holes measures…

The Curt Adjustable 2-Ball Mount and the replacement dual hitch ball replacements are only available in 2" and 2 5/16". Curt has a 3 ball adjustable ball mount that has a 1 7/8", 2" and 2 5/16" ball, the Curt Multi-Ball…

I have a solution for you, however, unfortunately, the Titan 3-Position Adjustable Channel Bracket, #T0897800, is a bolt on application. If you are needing a weld-on bracket, the Demco 4-Hole Adjustable Channel Bracket, #DM66736, is what I…

With the Demco 4-Hole Adjustable Channel Bracket - Weld On - 8" Tall - 7,500 lbs #DM55342, the 7,500 pound weight capacity is the gross towing weight capacity. If you need a higher towing capacity, I recommend the Demco 4-Hole Adjustable Channel…

Yes, the Replacement 2" and 2-5/16" Dual-Sided Ball part #C45923 will work with the Curt Pintle Hook with 2-5/16" Ball part #C45908.

The Demco Lunette Ring #DM09557-81 is approximately 3" wide and the holes are 1" apart center on center. This lunette ring fits in channel mounts like the Demco 6-Hole Adjustable Channel Bracket #DM59602.

I went out to the warehouse and pulled a 35 ft. Wishbone 4-Way Trailer Wiring Harness, #A35W42B, and used a wire gauge tool to measure the wires. The copper wire itself is 20 gauge. If you measure the wire with the insulation on it then it is thicker…

The standard 4 Flat will have the White (ground), Brown (running lights), Yellow (left turn and brake), and Green (right turn and brake). Black will typically be used for 12 volt power, but can also be any number of things. The only way to know for…

I recommend moving away from the Adapter 4-Pole to 5-Pole Trailer Wiring Adapter #47515 and going with a Buyers Products Trailer Connector Adapter #337TC1474P. The wiring and connectors used on the 4-way harness are not designed to be used with the…

What you have is a 4-way wishbone harness like part #A35W42B. It's a 4-way with two brown wires so you can run a running light circuit down each side of the trailer and not have to use a jumper wire to go from one side to the other. It makes…