Customers compare RP66083 to these similar products
Products Featured in this Video
Today well be removing part number RP66083. This is the Reese Straight Line Weight Distribution System with Sway Control. It is going to be a Trunnion Bar Design and its going to include the shank as well as all necessary hardware including your 5/8th inch pin that comes with a clip. Now this system is going to evenly distribute the weight over the axles of the towed vehicle and trailer for… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I think you'll need to go up a level in weight rating for your 5,000 lb GVWR Airstream travel trailer. The reason being the Reese Pro Round Bar Weight Distribution #RE34FR is for loaded tongue weights between 200 lbs and 600 lbs. I assume the…
view full answer...The two systems you mentioned are basically the two best systems available for weight distribution. Either one will work great for you as long as it is properly rated for your setup and is properly installed/set up. Personally I like the Reese…
view full answer...You definitely want to go with the Reese Strait-Line part #RP66074 that has a 1200 pound tongue weight for your travel trailer since your tongue weight will be over 800 lbs. When towing, if your weight distribution system is not rated high enough,…
view full answer...Tilting the hitch ball on your weight distribution system is a final adjustment to get the trailer perfectly level and apply the correct amount of tongue weight. You need to make this adjustment, if needed, after the the vehicle and trailer are…
view full answer...When it comes to choosing between the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 and the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37100ET you'll want to take a couple of things into…
view full answer...I spoke with my contact at Curt regarding the Curt TruTrack Weight Distribution System #C17499 that you are installing on your trailer. He said that you can install the support brackets 6 to 6-1/2 inches from the end of the spring bar without…
view full answer...Your camper is not too light for a weight distribution system and the Reese Pro Round Bar Weight Distribution item #RE34FR will work on your trailer. This system works with trailer's that have a tongue weight between 200 lbs and 600 lbs.…
view full answer...Yes, the Reese Weight Distribution System with Shank part #RE34FR will work on a 4,500 lb trailer. That said, hitch weights listed online are dry and you also need to add the weight of any cargo behind the rear axle. Therefore, you are likely…
view full answer...Extremely sharp turns like jack-knifing can result in the tension bar coming off of the dual cam completely on the Reese Strait-Line Weight Distribution Systems. The strait line system is designed for the spring bar to lift up off of the cam to…
view full answer...Weight distribution heads are adjustable to get the spring bars level or just below level with the trailer frame. Depending on the trailer frame, the head may need to be set at 90 degrees, it also may need to be tilted down as far as possible to…
view full answer...A weight distribution system like the Reese Pro Round Bar Weight Distribution w Sway Control #RE34FR will work great in distributing the load of your trailer across your axles. The Reese Pro Round Bar Weight Distribution w Sway Control #RE34FR you…
view full answer...Sway controls are designed to be used in situations where sway is a direct result of some type of road condition, like high winds or large vehicles passing. If you have sway with a trailer under normal towing conditions, sway control will most…
view full answer...