Review of Pacer Performance Vehicle Light Parts - Third Brake Light Logic Module - PP20-702 Video

Yes, you can use the factory trailer connector on your 2015 Nissan Titan to power the third brake light on your Leer camper shell. That said, they don't make a plug and play harness for this so you will need to do some wiring but no splicing…

The module is weather proof according to the manufacturer but I'd recommend installing it so that it's as well protected as possible. Inside the camper shell would be ideal as the 3rd brake lamp wiring is easy to access there.

The best product we have for wiring third brake lights in a camper shell is the 3rd Brake Light Logic Module part #PP20-702. If you were to combine this with an in-bed wiring harness such as the Curt 5th Wheel/Gooseneck Custom Wiring Harness part…

Although it is not required by law, what you are wanting to do is certainly possible. Because trailer tail light systems combine the stop lamp and turn signals for each side onto a single circuit, you will need to use a vehicle-to-vehicle tail…

The 3rd Brake Light Logic Module part #PP20-702 is the solution to your problem. It's very cost effective and easy to install. The module simply takes the stop/turn signal from the vehicle whether that's the right or left side and…

The pictures you are referring to are actually for older Silverado and Sierra pickups. I am not aware of any special wiring near the rear of your 2018 GMC Sierra 2500 but you can easily isolate the brake signal by using the 3rd Brake Light Logic…

You can use 7-way trailer wiring with the module part #PP20-702 to provide power to the third brake light of your camper shell/cap. Basically the stop/turn circuits of the trailer wiring need to run to the yellow wires of this module and then the…

The part #PP20-702 has to connect to both the left and right hand turn signal/stoplight circuits in order to separate out the stoplight. The reason that is because it waits to see voltage on both circuits at same time to then allow the stoplight…

The logic box that you are asking about is our Pacer Performance 3rd Brake Light Logic Module #PP20-702. This is a piece of equipment that is required when using an LED light as a 3rd brake light. If there is a specific light style that you are…

The Optronics #BUL602CRB is a 2-function lamp, taillight and back up lamp so it won't function in the fashion you're wanting. The good news is that we have a grommet mount lamp that will provide stop/turn, taillight and back up lamp…

The Thinline LED Trailer Tail Light part #STL64RB is a three function light with those functions being stop, turn, and running. It has a three wire design with the white wire being ground, the black wire for the tail lights, and the red wire for…

Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights…