Brake Light Logic Module for Use With 3rd LED Brake Light

Question:

Hello, I have a utility trailer with LED lights on it and would like to add a LED 3rd brake light. Is there a brake logic box that will work with LED lights? Thanks!

asked by: John C

Expert Reply:

The logic box that you are asking about is our Pacer Performance 3rd Brake Light Logic Module # PP20-702. This is a piece of equipment that is required when using an LED light as a 3rd brake light.

If there is a specific light style that you are looking for just let me know and I can make some recommendations for you.

expert reply by: Jon G

Pete A.

4/30/2020

For a correct hook up do I need to tap into each bulb circuit top and bottom turn brake light on left and right side. This is on a 2018 F150. Am I correct in stating splicing top and bottom bulb wires together then into one yellow wire. Repeat for other side. Then green to CHMSL. Will this correct the flashing when brake light is lit while turn signals are on?

Chris R.

5/2/2020

Take a look at the answer page I have linked below, which shows the actual wiring diagram for the Pacer 3rd Brake Light Module # PP20-702. The two yellow wires will actually tap into the turn/brake light assembly on each side of the trailer, while the green wire is what goes to the 3rd brake light.

Helpful Links

question-345402.html